Motorola DTR410 ユーザーズマニュアル
November 2008
9980384R89-E
3-4
Advanced Radio Operations: Accessing the Advanced Menu
Remote Monitoring (DTR410 and DTR650 Models Only)
NOTE: Manager Mode must be enabled in order to use this feature. Refer to page 4-9.
Remote Monitoring allows you to monitor a selected radio either for training purposes or if the target
radio user is unable to press the PTT button.
radio user is unable to press the PTT button.
1. From the Advance menu, scroll to highlight Remote Monitor and press
under Select.
The Remote Monitor screen appears.
2. Scroll to highlight a radio from the list to monitor and press
under Select. The screen
changes to show the radio’s status.
Remote Time (DTR410 and DTR650 Models Only)
Remote Time synchronizes the date and time to all other radios. It transmits the time on all channels
set as contacts in the transmitting radio. Any receiving radio must have the transmitting radio User ID
in their contact list to accept the time/date update.
set as contacts in the transmitting radio. Any receiving radio must have the transmitting radio User ID
in their contact list to accept the time/date update.
NOTE: Radios must be turned on and within range to receive this broadcast message. The
transmitting radio does not receive a confirmation for any failures.
1. From the Advance menu, scroll to highlight Remote Time and press
under Select. The
screen displays a confirmation to start remote time.
2. Press
under
Yes.
NOTE: For more information on DTR products, visit the following website at: <http://
www.motorola.com/DTR/>.