Motorola DTR410 ユーザーズマニュアル

9980384R89-E

November 2008

Radio Programming: Adding Contacts

4-5

The unit ID of a private contact can be read over the air or entered using the mini keyboard.

There are two procedures to enter an PID.

To read it in over the air (as pictured) refer to bullet 1 and follow the on-screen text to transmit the ID 
from another radio. In addition to the ID, the non-default name, channel, home group, and ringer for 
Gen3 radio are transmitted. to the receiving radio.

To enter the ID using the mini keyboard, refer to bullet 2.

1. Scroll to select ID and press 

 under Read. The ID screen appears.

2. Use the mini keyboard to enter an 11 digit ID. When the mini keyboard is connected, the left 

 becomes Change. After entering the ID, press 

 under Ok to confirm the entry and 

to return to the previous screen with the ID entered.

When programming a new PublicGroup, press 

 under Change to select a PublicGroup ID from 

1-50 for DTR410 or 1-100 for DTR550/650. IDs already in use on your radio are preceded by an “x”.

When programming a new PrivateGroup (DTR550 or DTR650 only), the radio selects your GroupID 
from your contact list. Press 

 under Change to select another Group ID. Since the default 

GroupID is dependent upon the contact list of all radios being the same, it is recommended to clone 
PrivateGroups to other radios.

If a Home Group is selected for your radio, then it returns to that Group after 30 seconds of inactivity. 
This ensures that any transmissions on this channel are not missed. Selecting a Home Group also 
automatically adds the contact to that PrivateGroup.

1. Scroll to select the Home Group Number and press 

 under Change. The Home Group 

screen appears.

NOTE: A 

 next to a selection indicates the present selection.

   

   

   

 

9