Tyco Electronics M7100IP ユーザーズマニュアル

 

 

This rocker type button is used to display the current SCAN status for a group/channel and
then either add or delete the group/channel from the system scan list.  

Pressing the add/delete button twice while the radio is actively receiving or three times when 
the radio is not receiving selects the last scanned channel (Last Scanned Channel Recall). 

 

Transmitter enabled - ON when the radio is transmitting.  

 

BuSY - Indicates a carrier is being received (the channel is busy).  Note that if the selected
channel is programmed for Channel Guard (CG), Digital Channel Guard (DCG) or Type 99
(T99) tone decode operation, the radio will not un-squelch if a valid tone or code is not 
received; the BSY indicator will be on.  

 

 

 

 

The keypad is similar to a telephone keypad but with four (4) additional buttons on the side for a total of 16 
keys. In addition to numbers (1-9, *, 0 and #), which is a secondary function, most of the keys have or can 
be programmed to have a primary function.  A symbol or abbreviated word describing its primary function 
is labeled on the keycap.  Each labeled keycap is associated with a radio feature (or primary function).  The 
radio must be programmed to operate with the Standard or the Optional keycap configuration.