Tyco Electronics M7100IP ユーザーズマニュアル
21
DEL
Secondary function - used to delete a digit during numeric entry (see Section
11.2).
11.2).
M
Primary function - accesses the menu list. This is a list of additional features that
are not available directly from the keypad. See Section 11.4 for details.
are not available directly from the keypad. See Section 11.4 for details.
SELECT
Secondary function - activates a selected item within a list. After the menus list is
accessed, select a menu item from the list via RAMP controls,
,
or
.
, and
activate it with this key. Once activated, MENU continues its secondary function
for activating a selected parameter setting until the radio returns to its normal
receive state. This is similar to an enter key.
for activating a selected parameter setting until the radio returns to its normal
receive state. This is similar to an enter key.
s
The Status key permits the transmission of a pre-programmed status message to
an EDACS or P25 Trunked site.
an EDACS or P25 Trunked site.
n
The Message key permits the transmission of a pre-programmed message to an
EDACS or P25 Trunked site.
EDACS or P25 Trunked site.
c
C
C
Serves several purposes depending on the operating mode. In trunked mode, the
CLR button exits the current operation and removes all displays associated with it.
The radio and display then return to the group receive state. In Conventional
mode, pressing this button unmutes the receiver so activity on the selected channel
can be monitored. When pressed and held for approximately 3 seconds, this button
toggles conventional channel decoding (Channel Guard, Digital Channel Guard,
T99) ON and OFF if programmed for the selected channel.
CLR button exits the current operation and removes all displays associated with it.
The radio and display then return to the group receive state. In Conventional
mode, pressing this button unmutes the receiver so activity on the selected channel
can be monitored. When pressed and held for approximately 3 seconds, this button
toggles conventional channel decoding (Channel Guard, Digital Channel Guard,
T99) ON and OFF if programmed for the selected channel.
p
Used to place telephone calls through the radio by selecting the interconnect
special call function. See TELEPHONE INTERCONNECT CALLS for
details.
special call function. See TELEPHONE INTERCONNECT CALLS for
details.
d
Used to adjust the current display intensity and the keypad backlight level.
i
Used to call an individual or make an all-call by selecting the individual call
function. See INDIVIDUAL CALLS for details.
function. See INDIVIDUAL CALLS for details.
E
or
or
The Emergency key is used to declare emergencies.
ALM
This key toggles the external alarm ON/OFF. The external alarm is used to
indicate the radio is receiving an Individual Call. Press the key once to enable
external alarm and press again to disable external alarm.
indicate the radio is receiving an Individual Call. Press the key once to enable
external alarm and press again to disable external alarm.
SG1-SG5
This key corresponds to five (5) pre-programmed System/Groups. Pressing a key
programmed for SG1 would switch the radio to the pre-programmed
System/Group 1. Pressing a key programmed for SG2 would switch the radio to
the pre-programmed System/Group 2, etc.
programmed for SG1 would switch the radio to the pre-programmed
System/Group 1. Pressing a key programmed for SG2 would switch the radio to
the pre-programmed System/Group 2, etc.
WAIL, YLP,
RST, SL1-
SL8
RST, SL1-
SL8
The WAIL and YLP (Yelp) keys are designed to control an optional Siren
package. The SL1-SL8 (Siren/Light) keys are designed to control an optional
Siren/Light package. The RST (Reset) key is used to turn all sirens and lights
OFF.
package. The SL1-SL8 (Siren/Light) keys are designed to control an optional
Siren/Light package. The RST (Reset) key is used to turn all sirens and lights
OFF.
SPK
This key function is used to toggle the external speaker ON/OFF.