Martin Audio DX2 ユーザーズマニュアル
All material © 2007. Martin Audio Ltd. Subject to change without notice.
You will need a 9 pin male-to-female, fully wired, pin-to-pin RS232 cable (not the
null modem type).
null modem type).
To load the latest presets into your DX2
1) Connect the 9-pin male to 9-pin female DEE type serial lead from your
computer to the external socket on the back of the unit. Note: this lead should be
pin-to-pin - not be of the null modem type.
2) On the DX2 use the blue
Menu
,
Back
,
Next
and
Enter
keys to go into the
Interface Sub-menu and then into External Interface.
3) Once entered, setup as follows:
Mode:
RS232 Mode
Wiser Wireless:
No
Serial Speed:
As required (e.g. 115200)
Stop MIDI Prog,Chng:
Yes
Remote ID Number:
1
Press
Enter
to confirm
4. Run the programme MartinFlashLoader.exe.
Click Load New Preset File.