Blomberg DV 17540 NBL00 ユーザーズマニュアル

22 - EN

There are humidity sensors in your machine 

that detect whether the laundry is dry or not.

For sensor cleaning;

1. Open loading door.

2. Allow machine to cool off if drying has been 

done recently.

3. Wipe the metal sensors with a soft cloth 

dampened with vinegar and dry the sensors 

afterwards.

C

 Clean the metal sensors at regular intervals 

(4 times a year).

A

 Never use solvents, cleaning agents or 

similar substances when cleaning as these 

might cause fire and/or an explosion!

Lint and fibers released from the laundry in to 

the air during the drying cycle are collected in 

the “Lint Filter”. 

C

 Fibres and lint are formed during wearing 

and washing.

A

 Always clean the filter after each drying 

cycle.

To clean the Filter;

1. Open loading door.

2. Remove the lint filter by pulling it up and 

open the filter.

3. Clean lint, fiber, and by hand or with a soft 

piece of cloth.

4. Close the filter and put it back in place.

C

 You can clean the filter and filter area with a 

vacuum cleaner.

C

 Clogging may arise on the filter surface 

after using your machine for some time; if this 

occurs, wash the filter with water and dry it 

before using again.