Blomberg DV 17540 NBL00 ユーザーズマニュアル

23 - EN

Problem

Cause

Explanation / Solution

Drying process 

takes too long. 

 Lint filter may not have been 

cleaned.

* Clean the lint filter.

* Meshes of the filter may be 

clogged. Wash with water.

Dryer does not 

switch on or the 

program does not 

start. Dryer does 

not start when set.

* It may not plugged in.

* The loading door may be ajar.

* Program may not be set or the 

“Start/Pause/Cancel” button may 

not have been pressed.

* “Childproof lock” may be activated.

* Make sure that the dryer is 

plugged in.

* Make sure the loading door is 

properly closed.

* Make sure the program has been 

set and it is not in “Pause” mode.

* Deactivate the childproof lock.

Program is 

interrupted for no 

reason.

* The loading door may be ajar.

* Electricity may be cut off.

* Make sure the loading door is 

properly closed.

* Press the “Start/Pause/Cancel” 

button to start the program.

Laundry has 

shrunk, become 

felted or has 

deteriorated.

* A program not suitable for the 

laundry type might have been used.

* Dry only the laundry which is 

suitable for drying in the dryer. First 

check the labels on the clothes.

* Select a program a suitable low 

temperature setting for the laundry 

type to dry the clothes.

“End / Anticrease” 

LED flashes.

* The 2-hour anti creasing program 

to prevent laundry from wrinkling 

may have been activated.

* Turn off the dryer and take the 

laundry out of the dryer.

“End / Anticrease” 

LED is on.

* Program has come to an end.

* Turn off the dryerand take the 

laundry out of the dryer.

“Filter cleaning” 

LED flashes.

* Lint filter may not have been 

cleaned.

* Clean the lint filter.

* Meshes of the filter may be 

clogged. Wash with water.

The “Drying” LED 

flashes.

* A heat sensor failure has occurred. 

dryer ends the program without 

heating.

* Turn off the dryer and remove the 

laundry. Call the authorized service.

A

 Call an authorized service if the problem persists.