Beko DRVS 73S ユーザーズマニュアル

18

EN

Your dryer will give an audio warning 

when the programme comes to an 

end. If you do not want to hear the 

audio warning, press “Cancel Audio 

Warning” button. The relevant light will 

turn on when this button is pressed 

and an audio warning will not be given 

when the programme comes to an 

end.

C

 You can select this function either 

before or after the programme starts. 

C

 Warning indicators may differ 

according to the model of your dryer.

A warning light will turn on to remind filter 

cleaning after the programme finishes.

C

 If the filter cleaning warning light 

lights up continuously, please refer to, 

“Suggested solutions for problems”.

Warning light starts flashing when the 

tank is filled with water. The dryer stops 

operating if the warning light turns on 

when a programme is running. Drain 

the water in the water tank to restart the 

dryer. Press “Start/Pause/Cancel” button 

to start the programme after you have 

emptied the water tank. The warning light 

turns off and the programme resumes 

operating.

If you wish to dry your clothes at a later 

time, thanks to the time delay function, 

you can delay the programme start up to 

3 hours, 6 hours or 9 hours.

1. Open the loading door and put the 

laundry in.

C

 Make sure that all air outlets are open, 

door filter is cleaned and the water 

tank is empty.

2. Set the drying programme and, if 

required, the auxiliary functions.

3. When the time programming button 

is pressed once, a 3 hour delay is 

selected and the relevant led lights. 

When the same button is pressed 

again, 6 hours; and if pressed once 

more, 9 hours delay will be selected. 

If the time programming button is 

pressed one more time, time delaying 

function will be cancelled. Set the time 

delay as you require.

4. Delayed operation of the selected 

programme is started by pressing 

the "Start/Pause/Cancel" button after 

selecting the time delay. 

C

 Additional laundry may be loaded / 

taken out during the time delay period.

C

 During the time delay period, laundry 

is rotated for 4 seconds in every 10 

minutes to prevent creasing.

If you want to cancel the time delay 

countdown and start the programme:

1. Press “Start/Pause/Cancel” button for 

about 3 seconds. 

2. Press “Start/Pause/Cancel” button to 

start the programme right away.

1. Press “Start/Pause/Cancel” button to 

start the programme.

2. Light of the “Start/Pause/Cancel” 

button will turn on to indicate that the 

programme has started.

Progress of a running programme is 

shown through the programme follow-up 

indicator.

At the beginning of every programme 

step, the relevant indicator LED will light 

up and light of the completed step will 

turn off.

- Drying level will be illuminated during 

the whole drying process until the drying 

degree reaches “iron dry”.

- Starts to illuminate when the drying 

degree reaches “iron dry” step and 

remains illuminated until the next step.

Starts to illuminate when the drying 

degree reaches “Ready to wear” step and 

remains illuminated until the next step.

- Illuminates when the programme comes 

to an end and anti-creasing function is 

activated.

C

 If more than one LED light up or 

flash concurrently, it means there is 

malfunctioning or a failure (please see, 

Solution suggestions for problems).