Sterling SCD 10 ユーザーズマニュアル

10 CFM Compressed Air Dryer 

Chapter 5: Maintenance 

21 of 30 

 

This dryer is designed to be virtually maintenance-free. This unit is factory-sealed. Any 
service required on this unit must be performed by factory personnel at the manufacturer’s 
facility. 

 

Inspect all filters for wear, and replace/clean if dirty or worn 

Weekly 

Check to make sure that all hose connections are air tight 

Monthly 

Lock out electrical power and inspect the main power supply for integrity. 

The 10 cfm compressed air dryer uses a large particle air filter in the process air system to 
clean the compressed air before it enters the drying cabinet. The optional remote-mount 
membrane dryer assembly features a coalescing filter in addition to the large particle air filter. 
Regular filter cleaning is essential to keep the dryer operating at peak efficiency. 

Use the following procedure to clean or replace the process air filter or the membrane dryer 
coalescing filter: 

1.  Turn off and lock out electrical power to the dryer. 

2.  Remove the clear bowl at the bottom of the filter. (See Figure 6). 

3.  Discard the contents of the clear filter bowl. 

4.  Visually inspect the filter element.  

5.  If needed, clean the filter element with compressed air or replace it. 

6.  Replace the clear bowl.