Metz 54 MZ-3 ユーザーズマニュアル
Push the setting disk in the direction of the arrow for
storage. Storage is automatic after 5 seconds if the
setting disk is not pressed. The arrow symbol will stop
flashing after storage. The partial light output is set to
P 1/1 when changing to another flash mode.
storage. Storage is automatic after 5 seconds if the
setting disk is not pressed. The arrow symbol will stop
flashing after storage. The partial light output is set to
P 1/1 when changing to another flash mode.
5.1 Sub-mode of the manual flash mode
The mecablitz must be fitted with an SCA 3xx2
adapter!
adapter!
Various cameras offer the possibility of high-speed syn-
chronisation (FP and HSS flash mode) when the meca-
blitz is in manual flash mode M (see operating instruc-
tions of the given camera and SCA adapter).
chronisation (FP and HSS flash mode) when the meca-
blitz is in manual flash mode M (see operating instruc-
tions of the given camera and SCA adapter).
Setting the „M-HSS“ sub-mode of the manual flash
mode:
mode:
• Continue depressing the Mode button until M flashes
on the display.
• Turn the setting disk to set HSS.
• Push the setting disk in the direction of the arrow for
storage. HSS will be automatically stored after approx.
5 seconds if the setting disk is not pressed. The M icon
will stop flashing after storage.
5 seconds if the setting disk is not pressed. The M icon
will stop flashing after storage.
Deactivating the HSS mode:
• Press the Mode button repeatedly until M flashes on
the display.
• Turn the setting disk to cancel HSS.
• Press the setting disk in the direction of the arrow for
storage. Storage will be automatic after 5 seconds if
the setting disk is not pressed. The M icon will stop
flashing after storage.
the setting disk is not pressed. The M icon will stop
flashing after storage.
☞
Manual flash mode
Modo flash Manaule
Funcionamiento manual
34
700 47 0078-A4 PDF GB-I-E 30.09.2008 14:12 Uhr Seite 34