Honeywell HCD484L ユーザーズマニュアル

Rev  2

9

G-113079-002

02/07

Use the OSD menu controls to program the camera.

1.

Press and hold the MENU (center) button for 2 
seconds to display the Setup menu.

2.

Press the UP or DOWN buttons to select a menu item.

3.

Press the MENU button to enter the selected 
submenu.

4.

Press the + or – buttons to increase/decrease the 
value of the selected item.

When you are satisfied with your settings:

1.

Press MENU for two seconds. The SETUP MENU is 
replaced by one of two messages:

SAVE? displays when values have been changed. 
Selecting SAVE exits Setup mode and saves your 
changes.

QUIT? displays when you have not changed any 
settings. Selecting QUIT exits Setup mode without 
saving any changed values.

2.

Press + or – to select SAVE or QUIT and then press 
MENU to exit the Setup mode. Press UP or DOWN to 
cancel the SAVE/QUIT and return to the SETUP 
MENU.

Select EXIT MENU on the SETUP MENU, 

press MENU, and then select SAVE AND EXIT to save the 
changed settings and exit the menu. Select EXIT to exit 
without saving the settings.

UP

DOWN

+