Concord Camera 5040 ユーザーズマニュアル

16

Use the self-timer to set a delay from the time the shutter button is pressed to the time the image is shot.

1.  Press 

 to switch between self-timer modes until the desired mode icon appears on the LCD.

2.  Shoot the image.

Blank

Without delay

 

Two seconds delay

 

Ten seconds delay

Photography hints:
Since the red Self -Timer LED in the front of the camera will blink after the Shutter button is fully
pressed down, you have time to join in the photograph and know when the camera is done taking a
picture when the self-timer LED stops blinking. 

The camera uses Auto Exposure to give well-exposed pictures under most 
lighting conditions. If the captured picture of the main subject turns out to be 
too light or too dark, use the Exposure Compensation feature to improve the 
exposure aspect.

1.  Press the MENU button.
2.  Press 

 or 

 to select Exposure then press the SET or   to enter its 

submenu.

3.  Press   or   to set the exposure compensation value. Available settings 

are:-2.0, -1.7, -1.3, -1.0, -0.7, -0.3, Auto, +0.3, +0.7, +1.0, +1.3, +1.7, +2.0.

4.  Press the SET button to confirm.

By default the camera uses Auto White Balance to reproduce colors under different lighting conditions. 
For mixed lighting conditions, it is recommended to use the Auto White Balance option. However, if the 
lighting condition is identical to one of the following White Balance settings, set the White Balance to the 
corresponding mode to get pictures with colors more accurately.

 

Auto

The camera will automatically choose the white balance setting.

 

Day light

For recording outdoors on a sunny day

 

Shade

For recording under overcast, shady or twilight skies

 

Tungsten

For recording under tungsten lighting

 

Fluorescent

For recording under fluorescent lighting

1.  Press the MENU button.
2.  Press 

 or 

 to select white balance then press the SET or   to enter its submenu.

2592 x1944

TAKING PICTURES