Panasonic AWRP120GJ ユーザーズマニュアル
23
Configuring the remote camera operation settings
(continued)
Setting the pan, tilt, zoom, and focus
operation directions
You can set the direction that a remote camera moves in response to
the operation of the PAN/TILT lever, ZOOM button, and FOCUS dial.
With this unit, you can set the direction for each camera number.
Setting the panning direction
Set the operation of the remote camera in the horizontal direction in
response to the horizontal operation of the PAN/TILT lever.
1 .
Press the MENU button .
2 .
Open PAN DIRECTION menu [26] .
3 .
Turn the F1 dial to display the camera number for which
to configure the setting .
1.CAM1
NORMAL
NORMAL
4 .
Turn the F2 dial to select “NORMAL” or “REVERSE”,
and then press the F2 dial to confirm the selection .
NORMAL : The remote camera moves to the left when the PAN/
TILT lever is moved toward the left, and to the right
when the lever is moved toward the right.
REVERSE : Operation is in the opposite direction to NORMAL.
Setting the tilting direction
Set the operation of the remote camera in the vertical direction in
response to forward and backward operation of the PAN/TILT lever.
1 .
Press the MENU button .
2 .
Open TILT DIRECTION menu [27] .
3 .
Turn the F1 dial to display the camera number for which
to configure the setting .
1.CAM1
NORMAL
NORMAL
4 .
Turn the F2 dial to select “NORMAL” or “REVERSE”,
and then press the F2 dial to confirm the selection .
NORMAL : The remote camera moves upward when the PAN/
TILT lever is moved away from you, and downward
when the lever is moved toward you.
REVERSE : Operation is in the opposite direction to NORMAL.
Setting the zooming direction
Set the zooming operation of the lens in response to the operation of the
ZOOM button.
1 .
Press the MENU button .
2 .
Open ZOOM DIRECTION menu [28] .
3 .
Turn the F1 dial to display the camera number for which
to configure the setting .
1.CAM1
NORMAL
NORMAL
4 .
Turn the F2 dial to select “NORMAL” or “REVERSE”,
and then press the F2 dial to confirm the selection .
NORMAL : The lens zooms toward the telephoto end when
the TELE side of the ZOOM button is pressed, and
toward the wide-angle end when the WIDE side is
pressed.
REVERSE : Operation is in the opposite direction to NORMAL.