Sony BDVN8100W ユーザーズマニュアル
72
US
BDV-N9100W/BDV-N8100W/BDV-N7100W
4-456-334-12(1)
D:\NORM'S JOB\SONY HA\SO130019\BDV-N9100W (PMRF
01)\4456334121_US (U)\100ADD.fm
01)\4456334121_US (U)\100ADD.fm
masterpage: Left
The Super Audio CD sound of an
equipment that is connected to the
HDMI (IN 1) or HDMI (IN 2) jack is not
output.
equipment that is connected to the
HDMI (IN 1) or HDMI (IN 2) jack is not
output.
t HDMI (IN 1) and HDMI (IN 2) does
not accept an audio format that
contains copy protection. Connect the
analog audio output of the equipment
to the AUDIO (AUDIO IN L/R) jacks
of the main unit.
contains copy protection. Connect the
analog audio output of the equipment
to the AUDIO (AUDIO IN L/R) jacks
of the main unit.
There is no sound from the TV via the
HDMI (OUT) jack when using the
Audio Return Channel function.
HDMI (OUT) jack when using the
Audio Return Channel function.
t Set [Control for HDMI] in [HDMI
Settings] of [System Settings] to [On]
(page 64). Also, set [Audio Return
Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page 64).
(page 64). Also, set [Audio Return
Channel] in [HDMI Settings] of
[System Settings] to [Auto] (page 64).
t Make sure that your TV is compatible
with the Audio Return Channel
function.
function.
t Make sure that an HDMI cable is
connected to a jack on your TV that is
compatible with the Audio Return
Channel function.
compatible with the Audio Return
Channel function.
The system does not output sound of
TV programs correctly when
connected to a set-top box.
TV programs correctly when
connected to a set-top box.
t Set [Audio Return Channel] in [HDMI
Settings] of [System Settings] to [Off]
(page 64).
(page 64).
t Check the connections (page 25).
Severe hum or noise is heard.
t Move your audio equipment away
from the TV.
t Clean the disc.
The sound loses stereo effect when
you play a CD.
you play a CD.
t Select stereo sound by pressing
The sound outputs from the center
speaker only.
speaker only.
t Depending on the disc, the sound may
output from the center speaker only.
No sound or only a very low-level
sound is heard from the surround
speakers.
sound is heard from the surround
speakers.
t Check the speaker connections and
settings (pages 22, 51).
t Check the sound mode setting
t Depending on the source, the effect of
the surround speakers may be less
noticeable.
noticeable.
t Set [Sound Mode] to [Auto] (page 33).
Distortion occurs in the sound of a
connected equipment.
connected equipment.
t Reduce the input level for the
connected equipment by setting
[Attenuate - AUDIO] (page 62).
[Attenuate - AUDIO] (page 62).
A sudden loud music is heard.
t The build-in sound demonstration is
activated. Press VOL – to reduce the
volume or press x to stop the
demonstration.
volume or press x to stop the
demonstration.
Wireless transmission is not
activated or there is no sound from
the surround speakers.
activated or there is no sound from
the surround speakers.
t Check the status of the LINK/
STANDBY indicator on the surround
amplifier.
amplifier.
Wireless sound