Honeywell EN2H-0221GE51 R0808 ユーザーズマニュアル
Operation
SDC / DHC
26 EN2H-0221GE51
R0808
5 °C (hot-water economy temperature) ... Maximum hot-water
heater temperature limit (service setting)
heater temperature limit (service setting)
Pressing and holding (approx. 3 s) the
§
button brings you to
the reload function, where the reload time can be set in minutes.
With a reload time of 0 minutes, loading is started once and the
hot-water tank is loaded to the daytime setpoint. The time for this
superimposed hot-water circuit loading can be set between 0 and
240 minutes. The current week program is superimposed here.
With a reload time of 0 minutes, loading is started once and the
hot-water tank is loaded to the daytime setpoint. The time for this
superimposed hot-water circuit loading can be set between 0 and
240 minutes. The current week program is superimposed here.
5.1.2.5 "Operating mode" button (basic display)
Sets the operating mode and returns to the basic display from
every operating level.
every operating level.
Setting range
One-time hot-water
circuit loading