Desa TD120A ユーザーズマニュアル

ページ / 24
www.desatech.com
122139-01A
4
24. Keep heater away from areas where flam-
mable liquids, vapors or solids are stored 
or used.
25. If operated in salt air environments, the 
unit will require more frequent cleaning; 
otherwise,  the  longevity  of  the  unit  will 
deteriorate rapidly. Use warm soapy water 
to clean the unit.
26. Items or material, when stored under the 
heater, will be subjected to radiant heat 
and could be seriously damaged.
Any guard or other protective device 
removed  for  servicing  must  be  re-
placed prior to operating the heater.
Surface temperatures become very 
hot when operating heater. Children 
and adults should stay away to avoid 
burns or clothing ignition.
Young children should be carefully 
supervised when they are in the area 
of the heater.
Clothing or other flammable mate-
rials  should  not  be  hung  from  the 
heater, or placed on or near heater.
Installation  and  repair  should  be 
done by a qualified service person. 
The  heater  should  be  inspected 
before use and at least annually by 
a  qualified  service  person.  More 
frequent cleaning may be required 
as necessary. It is imperative that 
control compartments, burners and 
circulating air passageways of the 
heater be kept clean.
 CAUTION: The gas pressure 
regulator provided with this ap-
pliance must be used. This regu-
lator is set for an output pressure 
of 11" W.C. (2.74 kPa).
SAFETy
Continued
PrOPANE/LP SAFETy
 WARNING: For outdoor use 
only.
ASPhYxIATION hAzARd
•  do not use this heater for heating human 
or animal living quarters.
•  do not use in unventilated areas.
•  The flow of combustion and ventilation 
air must not be obstructed.
•  Proper ventilation air must be provided 
to support the combustion air require-
ments of the heater being used.
•  Refer  to  the  Specifications,  page  2, 
heater data plate or contact dESA heat-
ing,  LLC  to  determine  combustion  air 
ventilation requirements of the heater.
•  Lack of proper ventilation air will lead 
to improper combustion.
•  Improper combustion can lead to carbon 
monoxide poisoning leading to serious 
injury or death. Symptom of carbon mon-
oxide poisoning can include headaches 
dizziness and difficulty in breathing.
UNPAckiNG
When assembling for the first time, be sure to 
remove all packaging from the components 
prior to beginning assembly.