Desa TD120A ユーザーズマニュアル

ページ / 24
www.desatech.com
122139-01A
8
OPErATiON
 WARNING: If you smell gas:
•  Shut off gas to the appliance.
•  Extinguish any open flames.
•  If odor continues, immediately 
call your gas supplier.
See  safety  warnings  and  pre-
cautions  starting  on  the  front 
page  of  this  manual  for  more 
information. 
Before You Use Your Heater
1.  Move heater to an open area.
2.  Make sure tank valve is in its full off posi-
tion (turn clockwise to stop).
3.  Check  tank  valve  features  to  ensure  it 
has proper external mating threads. (Tank 
valve marked USE WITH TYPE 1.)
4.  Never  attempt  to  use  any  components 
that have been damaged or exposed to 
an accidental fire.
The  connection  provided  with  this  heater 
incorporates  two  important  features:  Tem-
perature Activated Shutoff and Excess Flow 
Control.
Figure 13 - Control Knob and Ignitor Button
Control 
Knob
Ignitor 
Button
Match Hole
TO LIGhT
1.  Open main gas supply valve on propane 
cylinder.
2.  Turn  control  knob  on  heater  to  the  ON 
position.  Press  for  3  seconds.  While 
pressing  control knob, repeatedly press 
red igniter button until burner is lit (may re-
quire pushing more than once). Continue 
to press control knob for 30 seconds then 
release.
3.  TO MATCH LIGHT: Insert flame into match 
hole near burner. Press and hold control 
valve button until flame is lit. Continue to 
hold valve button for 30 seconds.
IMPORTANT:  Smoke  and  odor  (not  a  gas 
odor) emission may occur in the first 15 min-
utes of use. Run heater at high setting for at 
least 15 minutes to eliminate this problem.
 WARNING: If you smell gas 
while in use, immediately press 
and turn control knob to the OFF 
position to shutdown heater.
TO ShUT dOWN
1.  Shut off main gas supply.
2.  After heater goes out, turn control knob 
to the OFF position.
3.  Wait 5 minutes before relighting or moving 
heater.