Desa CB36P ユーザーズマニュアル
www.desatech.com
117437-01D
19
INSTALLING LOGS AND GLOWING
EMBERS
EMBERS
A.4.piece.ceramic.log.set.comes.packed.in-
side the unit firebox. Removal of glass door is
necessary.to.unpack.and.assemble.logs.and.
add. hearth. treatments.. Follow. steps. under.
Removing/Replacing Glass Door, page 18 to
access.logs.and.burner.
Assemble. logs. and. add. burner. treatments.
as.follows:
1.. Position.base.log.onto.burner.log.mounts.
side the unit firebox. Removal of glass door is
necessary.to.unpack.and.assemble.logs.and.
add. hearth. treatments.. Follow. steps. under.
Removing/Replacing Glass Door, page 18 to
access.logs.and.burner.
Assemble. logs. and. add. burner. treatments.
as.follows:
1.. Position.base.log.onto.burner.log.mounts.
(see.Figure.31).
Figure 31 - Installing Logs
FIREPLACE INSTALLATION
Continued
Figure 32 - Applying Ember Material
.
Note: Cut out on bottom should fit over
mounts and base log should be positioned
against rear panel.
mounts and base log should be positioned
against rear panel.
.. Position.holes.on.bottom.of.rear.log.over.
pins.on.base.log.(see.Figure.31).
3.. Position. top. left. log. and. top. right. log.
onto.rear.log.and.base.log.as.shown.in.
Figure.31.
Figure.31.
4. Break ember material into quarter sized
pieces.and.place.a.single.layer.along.the.
full. length. of. ember. tray. to. hide. bottom.
edge.of.base.log.(see.Figure.3).
full. length. of. ember. tray. to. hide. bottom.
edge.of.base.log.(see.Figure.3).
5.. Replace. glass. door. and. louver. panels.
(see. Removing/Replacing Glass Door,
page.18).
page.18).
WARNING: The glass door
must be securely in place before
running this fireplace. Do not run
this fireplace if glass is missing
or broken.
Top.
Right.
Log
Right.
Log
Top.Left.
Log
Log
Rear.
Log
Log
Burner.
Base.Log
Base.Log
Rear.Log.
Stand
Stand
Burner.
Pan
Pan
Log.
Mounts
Mounts
Ember.
Tray
Tray
Ember.
Material
Material