Paradox Hellas S.A. DGP2-641BL ユーザーズマニュアル

You can bypass certain zones when you arm the protected area(s). When a zone is 
bypassed, it will be ignored the next time your system is armed. Once your area is 
disarmed, the system will unbypass the zone. 

To Bypass a zone:

1. Enter your [

].

2. Press the [

 

button or the [

] key. 

3. Enter the zone number (i.e. 01, 02,...96), or use the [

S] and [T] buttons and press 

] or [

] once the zone you want to bypass appears on the screen. If 

bypassed, the   icon or the byp light does not appear on the screen and the 
keypad emits a rejection beep, you may not have access to bypass that zone.

4. Repeat step 3 until all zones you want to bypass have been selected.
5. Press the [

] button to save and exit.

In order to bypass a zone, the following conditions must be met:
• The zone must have the Bypass option programmed by your installer.
• The Bypass option must be enabled in your User Options.
• Your user access code must have access to the zone’s Area Assignment.
• The zone’s area must be disarmed before the zone can be bypassed.

Bypass Recall reinstates the zones that were bypassed the last time your system 
was armed.

To activate Bypass Recall:

1. Enter your [

]. 

2. Press the [

] button or the [

] key. 

3. Press the

 

 

button or the [

] key.

Zones bypassed the last time your system was armed are bypassed. 

4. Press the [

] button to save and exit.

If enabled by your installer, you can access the following features without using your user 
access code by pressing and holding the desired One-Touch button.

Table 3: One Touch Button

A key can be used to arm and disarm your system using two forms of keyswitches. With a 
Maintained Keyswitch, place the key in the “ON” position to arm your system, and place 
the key in the “OFF” position to disarm your system. With a Momentary Keyswitch, place 
the key in the “ON” position briefly then place it back in the “OFF” position to arm the 
system. Repeat this process to disarm with a Momentary Keyswitch.

[ ] 

Regular arm

] 

Stay arm

Force arm

Bypass Programming

Disarm a Stay/Instant armed area

Instant arm

Change display settings

View Event Record display (DGP2-641BL/RB only)