Paradox Hellas S.A. DGP2-641BL ユーザーズマニュアル

When your system is armed, it can respond to any breach in the protected zones by causing an alarm and sending a report to 
your monitoring station.

When you arm your system, it will trigger the Exit Delay Timer to provide you with enough 
time to exit the protected area before the system is armed. The 

 light and the 

appropriate arm icon will both flash during the exit delay on the DGP2-640

 

keypad. (Refer 

This method is used for the everyday arming of your system. All zones within the 
protected area must be closed to Regular arm the system.

To Regular arm the system:

1. Enter your [

]. 

2. Press the [

] button or the [ ] key. 

3. If you have access to more than one area, select the area(s) you wish to Regular arm 

Stay arming will partially arm your system to permit you to remain in your home or office 
by arming the outer zones (perimeter) of the protected area (i.e. doors and windows).

To Stay arm: 

1. Enter your [

]. 

2. Press the [

] button or the [

] key.

3. If you have access to more than one area, select the area(s) you wish to Stay arm 

This feature is the same as Stay arming except that there is no Entry Delay. Therefore, 
any armed zone that is breached will immediately generate an alarm.

To Instant arm:

1. Enter your [

].

2. Press the [5] button. 
3. If you have access to more than one area, select the area(s) you wish to Instant arm 

Force arming allows you to quickly arm your system when zones are open. However, 
once the open zone is closed, your system will then arm that zone as well.

To Force arm:

1. Enter your [

]. 

2. Press the [

] button or the [ ] key.

3. If you have access to more than one area, select the area(s) you wish to Force arm