Honeywell M9481 ユーザーズマニュアル

 

 

94 is Series 90

 is high torque

150 lb.-in. at

standard timing

9 is high torque

300 
2 or 4 min timing

Output Drive

4 is dual-ended shaft,

non-spring return

1 is single-ended shaft,

non-spring return

D:

E:

F:

is adjustable stroke

 to 1 

No auxiliary switches
is adjustable stroke

 to 1 

1 auxiliary switch

is adjustable stroke

 to 1 

2 auxiliary switches

NOTE: Some motors furnished to equipment manufactur-

ers will have no adapter bracket, a single-ended shaft
and/or no wiring box.

CONTROLLER TYPE: Series 90 Control Circuit-135

ohm series 90 proportioning controller. Series 90 high
or low limit controller with manual minimum position po-

tentiometer (with a combined total resistance of up to

500 ohms) may also be used in the control circuit.

MOTOR ROTATION: Normally 

 The closed posi-

tion is the limit of counterclockwise rotation as viewed
from the power end of the motor. See Fig 2. 

 

clockwise (as viewed from the power end). Motors are

shipped in the closed position.

ELECTRICAL RATINGS:

VOLTAGE POWER

CURRENT 

DRAW (A)

 

Without

Transformer

With internal
Transformer

24 0.8 18

120 0.24 23

208 0.14 23

240 0.12 23

STROKE: Field adjustable from 

 to 

 Start position

of shaft changes with adjustment of stroke. (Midpoint of

stroke remains fixed as stroke is adjusted, as shown in

Fig. 2.) Stroke is adjusted by means of cams located in

wiring compartment. (See Stroke Setting Procedure.)

Motors are shipped with stroke set at 

DEAD WEIGHT LOAD ON SHAFT:

Power or Auxiliary End-200 lb. 

 kg] maximum.

Maximum Combined Load-300 lb. 

 kg].

AMBIENT TEMPERATURE RATINGS:

 F 

 C] 

 25% duty cycle.

Minimum-minus 

 F 

 C].

CRANKSHAFT: 

 inch 

 square

M9484, M9494 have double-ended shaft.

M9481, M9491 have single-ended shaft.

 normal position is the position the motor will assume

with controller disconnected.

 

             

 

                                                                                                                                                                                                                               

 

 

 

 

   

   

 

               

     

       

 

   

 

             

                         

 

                       

     

 

WHEN PURCHASING REPLACEMENT AND MODERNIZATION PRODUCTS FROM YOUR AUTHORIZED

DISTRIBUTOR, REFER TO THE TRADELINE CATALOG OR PRICE SHEETS FOR COMPLETE ORDERING

NUMBER.

ON OUR PRODUCTS OR SERVICES, PLEASE WRITE OR PHONE:

2.

YOUR LOCAL HONEYWELL RESIDENTIAL AND BUILDING CONTROLS SALES OFFICE (CHECK WHITE

 AND BUILDING CONTROLS CUSTOMER SERVICE

HONEYWELL INC., 1885 DOUGLAS DRIVE NORTH

MINNEAPOLIS, MINNESOTA 55422-4386 

(IN CANADA-HONEYWELL LIMITED/HONEYWELL LIMITEE, 740 ELLESMERE ROAD, SCARBOROUGH,

ONTARIO Ml P 

 

 SALES AND SERVICE OFFICES IN ALL PRINCIPAL CITIES OF THE

WORLD.

2