Electrolux W 375 B ユーザーズマニュアル

 

Drop the brushes (one or two depending on the 
model) roughly side by side in front of the 
machine, the actual position does not matter.

Switch the machine on by turning the key in the 
key-switch a quarter turn clockwise. Wait 
momentarily until the battery condition indicator 
above the switch lights.

 

:

The mains machine will have to be plugged in, 
the indicator then only shows that power is 
available.

Drive the machine forward by holding the hand-
grips, then rolling the thumb wheels forward until 
the machine moves completely over the brushes. 
To stop release the thumb wheels and they will 
return to a neutral position. This will ensure the 
brushes are fully located under the drive plates.

 

Position the new brushes roughly side by side on 
the floor in front of the machine.

Move the machine forward until the brushes are 
pushed along the floor. Release the brush lift/
lower pedal and allow it to settle at its highest 
point. Rock the machine forward and back about 
50mm (2”) to settle the drive plates into the brush 
centers.

Press the brush motor on/off push button to 
engage the brushes. Press the brush pedal down 
and latch it into its lower position, press the brush 
push button again to stop the motors.

The machine is now ready for use again.