Sharp KC-860U ユーザーズマニュアル

ENGLISH

E-15

CARE AND MAINTENANCE

UNIT

To prevent dirt or stains on the unit, clean regularly. If stains are allowed to remain, they may

become diffi cult to remove.

Wipe with a dry, soft cloth

For stubborn stains or dirt, use a soft cloth dampened with warm water.

Do not use volatile fl uids

Benzene, paint thinner, polishing powder, may damage the surface.

Do not use detergents

Detergent ingredients may damage the unit.

FILTER INDICATOR LIGHT

The Filter Indicator Light will illuminate as a reminder to perform mainte-

nance of the Back Panel, Sensors, and Humidifying fi lter. The Indicator

Light will turn on after approximately 720 hours of use.
After performing maintenance, reset the Filter Indicator. Plug the unit in,

turn power ON, and press the RESET button for 3 seconds. The Filter

Indicator Light will go off. Even if the Filter Indicator Light is already off,

the RESET button should be pressed to reset the maintenance timer.

To maintain optimum performance of this air purifi er, please clean the unit including

the sensor opening and fi lters periodically.

When cleaning the unit, be sure to fi rst unplug the power cord, and never handle the

plug with wet hands. Electrical shock and/or bodily injury may occur as a result.

After 720 hours of use

(30days ×24hours = 720)

Whenever dust accumulates on the unit or every 2 months

Care Cycle

Sensor

Back Panel

Care Cycle

Whenever dust accumulates

on the unit or every 2 months

Gently remove dust from the sensor opening and the

back panel, using a vacuum cleaner attachment or

similar tool.

When the back panel has stubborn dirt

In case of oily dirt, soak the back panel in water with

kitchen detergent.

Avoid scrubbing the back panel when washing.

Rinse the back panel repeatedly with clean water to re-

move the solution residue.

Drip dry panel to remove excess water.

SENSOR FILTER CARE

Remove the sensor filter and tap it lightly over a sink

or bin to dislodge dust. If it is very dirty, wash it gently

with lukewarm water. Do not use any detergents or

chemicals of any kind to clean the fi lter. Dry the fi lter

completely before replacing in the unit. Do not operate

unit without all fi lters properly installed.

BACK PANEL and SENSORS

Sensor fi lter

KC-860U_Eng.indd 15

2009/12/28 14:07:18