Chamberlain WD962KPEV ユーザーズマニュアル

8

Bolt

Bolt 1/4"-20x1-3/4" 

Lock Nut 1/4"-20

Nut 3/8"

Lock Washer 3/8"

Lay the belt beside the rail, as shown. 
Grasp the end with the hooked trolley 
connector and pass approximately 12" 
(30 cm) of belt through the window. 
Keep the ribbed side toward the rail, 
and allow it to hang.

Remove the tape from the pulley. The 
center should be greased, if not, re-
grease the center of the pulley.

Insert the pulley into the window of the 
front rail.

Insert the bolt (H3) into the rail and 
pulley. Tighten securely with the lock 
washer (H7) and nut (H6).

Rotate the pulley to be sure it spins 
freely.

Insert the bolt (H2) into the hole 
shown and fasten with the lock 
nut (H4).

H6

H7

H4

Screwdriver

Rail

Pulley

Trolley 
Connector

H2

H3