Sharp AY-XPC9JR ユーザーズマニュアル

GB-4

There are two clock modes: 12-hour mode and 

24-hour mode.
Example: 5 o’clock in the afternoon
 Clock 

Display

 

12-hour mode 

PM   5:00

 24-hour 

mode 

17:00

 

•  Keep the button pressed to advance or 

reverse the time display quickly. 

 

 

• The colon (:) blinks to indicate that the clock 

is functioning.

• The current time cannot be set when the timer is 

operating.

Use two size-AAA (R03) batteries.

making sure the (+) and (-)  polarities 

 

• The display indicates “AM 6:00” when 

batteries are properly installed.

Remote 

control cover

• The battery life is approximately one year in 

normal use.

• When you replace the batteries, always change 

both batteries, and make sure they are the same 

type.

• If the remote control does not operate properly 

after replacing the batteries, take out the batteries 

and reinstall them again after  30 seconds.

• If you will not be using the unit for a long time, 

remove the batteries from the remote control.

Point the remote control towards the unit’s signal 

receiver window and press the desired button. The 

unit generates a beep when it receives the signal.
• Make sure  there is no curtain or other object 

between the remote control and the unit.

• The remote control can send signals from up to 7 

metres away.

•  Do not allow the signal receiver window to receive 

strong direct sunlight, since it can adversely affect 

its operation. If the signal receiver window is 

exposed to direct sunlight, close a curtain to block 

the light.

• Using a fl uorescent lamp with a quick starter in 

the same room may interfere with transmission of 

the signal. 

• The unit can be affected by signals transmitted 

from the remote control of a television, VCR or 

other equipment used in the same room. 

• Do not leave the remote control in direct sunlight 

or near a heater. Also, protect the unit and remote 

control from moisture and shock which can 

discolour or damage them.