Friedrich SS15N30* ユーザーズマニュアル

50

Inspect the sleeve and drain system periodically (at least yearly or bi-yearly) and clean of all obstructions and  

debris.

 Clean both areas with an antibacterial and antifungal cleaner. Rinse both items thoroughly with water and 

ensure that the drain outlets are operating correctly. Check the sealant around the sleeve and reseal areas as 

needed.  

Clean the front cover when needed. Use a mild detergent. Wash and rinse with warm water. Allow it to dry 

thoroughly before reinstalling it in the chassis.  

The decorative front and the cabinet can be cleaned with warm water and a mild liquid detergent. Do NOT use 

solvents or hydrocarbon based cleaners such as acetone, naphtha, gasoline, benzene, etc. 

 

Use a damp (not wet) cloth when cleaning the control area to prevent water from entering the unit, and possibly 

damaging the electronic control. 

Inspect the surrounding area (inside and outside) to ensure that the unit’s clearances have not been compromised or 

altered.  

Do not drill holes in the bottom of the drain pan or the 

underside  of  the  unit.  Not  following  this  notice  could 

result in damage to the unit or condensate water leaking 

inappropriately  which  could  cause  water  damage  to 

surrounding property.

Compressor

Fresh Air Vent

Evaporator Coil

Electronic Control

Board

Control Key Pad

Support Bar

Blower Wheel

Air Intake From 

Sides and Bottom

Control Key Pad

(User Interface)

Chassis Pull

Out Handle

Base Pan

Fan Blade

Fan/Blower Motor

Air Intake Vents

Sleeve

Condenser Coil

Discharge Air

Outdoor Grille

Accumulator

Reversing Valve