Regency F2402M ユーザーズマニュアル
Regency Freestanding Woodstove
15
side with the air holes facing toward the door.
Slide the tube into the left hand side, as far
as possible and then bring it back into the
hole on the right hand side until it locks into
position. If the tube will not slide in easily,
simply use a pair of vise grips or pliers and
tap it into place with a hammer. A tighter fi t
will ensure the tube will not move when the
unit is burning.
Slide the tube into the left hand side, as far
as possible and then bring it back into the
hole on the right hand side until it locks into
position. If the tube will not slide in easily,
simply use a pair of vise grips or pliers and
tap it into place with a hammer. A tighter fi t
will ensure the tube will not move when the
unit is burning.
2) Slide the left baffl e over the air tubes from
the front and then push it to the back.
SIMPSON DURA-PLUS
Qty.Part #
Qty.Part #
Description
1 6DVL8693 Connector
Kit
1 6DP-MH9096 Mobile Home Kit
ICC EXCEL 2100
Qty.Part #
Qty.Part #
Description
1 6CL48
48" (1219mm)Chimney length
(also in 12" (305mm), 18"
(457mm), 24" (610mm) lengths.
1 6RC
(457mm), 24" (610mm) lengths.
1 6RC
Rain
Cap
1 6RCS
Spark Screen (for rain cap)
1 6RDS/SQS
Round/Square
support
box
1 6VF
Flashing
1 6UBA
"Ultrablack" Close Clearance
Connector
Canadian Installations*
SECURITY S2100 (see above for details)
ICC EXCEL 2100 (see above for details)
SELKIRK SENTINAL CF
*The use of alternate pitch fl ashings, support box
extensions, additional chimney lengths, and ad-
ditional chimney bracing, may be used on each of
the previously listed systems. These parts though
must be from the same system as listed, and must
be a similar and/or complimentary part.
extensions, additional chimney lengths, and ad-
ditional chimney bracing, may be used on each of
the previously listed systems. These parts though
must be from the same system as listed, and must
be a similar and/or complimentary part.
CAUTION: At no time use unlabelled
parts, or substitute parts made for
another chimney system.
parts, or substitute parts made for
another chimney system.
Install as per chimney manufacturer's instal-
lation instructions.
lation instructions.
FLUE BAFFLE &
SECONDARY AIR TUBE
INSTALLATION
The fl ue baffl e system located in the upper area
of the fi rebox is removable to make cleaning
your chimney system easier. The baffl es must
be installed prior to your fi rst fi re. Smoke spill-
age and draft problems may occur if the
baffl es are improperly positioned. Check
the position of the baffl es on a regular basis as
they can be dislodged if too much fuel is forced
into the fi rebox.
of the fi rebox is removable to make cleaning
your chimney system easier. The baffl es must
be installed prior to your fi rst fi re. Smoke spill-
age and draft problems may occur if the
baffl es are improperly positioned. Check
the position of the baffl es on a regular basis as
they can be dislodged if too much fuel is forced
into the fi rebox.
Freestanding Stove
The unit arrives with the 2 baffl es on the fl oor
of the fi rebox.
of the fi rebox.
1) If all 4 air tubes are installed continue on to
Step 2), if not, follow the instructions below.
Install the air tube into the holes in the side
channels. The notch goes on the right hand
Install the air tube into the holes in the side
channels. The notch goes on the right hand
LISTED COMPONENTS
FOR MOBILE HOME
INSTALLATION
The Regency F2402M and S2402M Freestanding
pedestal units are approved for installation in a
Mobile Home if one of the following pipe systems
is used.
pedestal units are approved for installation in a
Mobile Home if one of the following pipe systems
is used.
U.S. Installation*
METALBESTOS SSII
Qty. Part #
Qty. Part #
Description
1 6DS-VK Connector
Kit
1 6TMH
Shield/Support
1 6TAF-6
Flashing
1 6T-36
Chimney
Length
1 6T-18
Chimney
Length
1 6T-CT
Rain
Cap
PRO-JET 3103
Qty.Part #
Qty.Part #
Description
1 PV06-TK Connector
1 CSB
1 CSB
Shield/Support
1 RRS
Radiation
Shield
1 LFR03
Flashing
1 SL3
Chimney
Length
1 SL1
Chimney
Length
1 RCSA
Rain
Cap
SECURITY ASHT
Qty.Part #
Qty.Part #
Description
1 DL42A-6 Connector
Kit
1 6SS
Shield/Support
1 6FAMH
Flashing
1 6L3
Chimney
Length
1 6L1
Chimney
Length
1 CPE
Rain
Cap
SECURITY S2100
Qty.Part #
Qty.Part #
Description
1 DL42A-6 Connector
Kit
1 6XSF
Support
1 6XFA
Flashing
1 6XL3
Chimney
Length
1 6XL18
Chimney
Length
1 6XCPE
Rain
Cap
METAL-FAB TEMP/GUARD 2100
Qty.Part #
Qty.Part #
Description
1 6DWBK
Connector
1 6TGRS
Roof
Support
1 6TGG36 Chimney
Length
1 6TGG12 Chimney
Length
1 6TGF
Flashing
1 6TGC
Rain
Cap
AMERI-TEC HS
Qty.Part #
Qty.Part #
Description
1 6DCC
Connector
1 6HSRS-12 Roof
Support
(6PLRS-12-BK)
1 6F
Flashing
1 6HS-36
Chimney
Length
1 6HS-18
Chimney
Length
1 6HS-RCS Rain
Cap
(6PL-MPC)
INSTALLATION
3) Tilt the left baffl e up on top of the side chan-
nel and it will leave enough room to position
the right baffl e in the same manner as Step
1) above. Then reposition the left baffl e fl at
on the air tubes.
the right baffl e in the same manner as Step
1) above. Then reposition the left baffl e fl at
on the air tubes.
4) Important: push both baffl es so they are
tight against the side walls.
Note: When getting the chimney cleaned,
push the baffl es forward toward the
front of the stove, this should leave
suffi cient access to the fl ue. If it is
not enough space then remove the
middle air tube (reverse the procedure
in step 1) above), and baffl e and then
replace everything when cleaning is
completed.
front of the stove, this should leave
suffi cient access to the fl ue. If it is
not enough space then remove the
middle air tube (reverse the procedure
in step 1) above), and baffl e and then
replace everything when cleaning is
completed.
Side View
Front View
Front View