ONKYO T-4555P ユーザーズマニュアル

 

16

 

Use the supplied audio cable to connect the T-4555P’s 
AUDIO OUTPUT L/R jacks to the TUNER IN jacks on 
your amplifier, as shown.

To use the 

 system functions, use the supplied 

 

cable to make an 

 connection (see the next column).

 

• If the T-4555P is used with another Onkyo compo-

nent, such as the A-9555, refer to its instruction man-
ual as well.

If you connect the T-4555P to another Onkyo 

-capa-

ble component with the supplied 

 cable and audio 

cable, you can use the following system functions. 

 

cables are special cables solely for use with Onkyo 
products.

 

When you turn on the T-4555P, your Onkyo amplifier 
will turn on automatically. (The amplifier’s POWER 
switch must be set to ON for this to work.)

 

When you select a radio preset or change the band (AM, 
FM, etc.), your Onkyo amplifier will automatically 
select the T-4555P as the input source.

 

You can control the T-4555P by using your Onkyo 
amplifier’s remote controller. See the amplifier’s 
instruction manual for details.

• Refer to the instructions that came with the com-

ponent you are connecting.

• Do not plug in the power cord until all other con-

nections are complete.

• Do not bind audio cables with power cords and 

speaker cables. Doing so may adversely affect the 
sound quality.

• To prevent interference, keep power cords and 

speaker cables as far away as possible from the 
antennas.

• Red plugs are used for the right channel, white 

plugs are used for the left channel.

• Push each plug in all the way to make a good con-

nection (loose connections can cause noise or mal-
functions).

Supplied  

cable

Supplied audio 
cable

Amplifier

T-4555P_En.book Page 16 Wednesday, August 9, 2006 3:42 PM