Ei Electronics Ei146 プリント

ページ / 2
 
Shannon Free Zone, Shannon, Co. Clare, Ireland. 
Ph.
+353 61 471277   
Fx.
+353 61 471053   
 
Email.
 eielectronics@eiltd.ie
 
 
Web:
 www.eielectronics.com 
E & OE  As our policy is one of continuous product development, we reserve the right to alter product details without prior n otice
.           
Ei146 DataSht RevB
 
 
Model 
Ei146 Optical 
 
Easi-Fit base 
 
9V Alkaline Battery back up 
 
High performance optical chamber with integral 
insect screen 
 
Test/Hush button 
 
Advanced suppression and calibration technology 
 
Interconnectable to other Ei mains powered alarms 
 
Built in auto self test feature 
 
Low power cell warning 
 
Kitemarked to BS EN 14604:2005 
 
5 year guarantee 
 
 
Product Description 
 
The Ei146 is an Optical Smoke Alarm that runs on 230V 
AC mains power, and has a 9V alkaline battery back up 
in the event of mains failure. The 9V battery will last for 
up to 4 years in standby mode, and capable of powering 
the smoke detector for up to 2 years in the event of 
mains failure. 
 
The Ei146 is supplied with the Easi-Fit base that allows 
very quick and simple installation of the smoke alarm, 
combined with simple detector head removal and 
replacement. The Easi-Fit base automatically connects 
both mains power and battery as the detector head 
slides on to the Easi-Fit base. 
 
The Ei146 has other advanced features such as high 
performance optical chambers fitted with integral insect 
screens to reduce the chances of false alarms, as well 
as the ability to interconnect up to twelve alarms to allow 
all alarms to sound if just one of the interconnected 
alarms should be triggered. 
 
The Ei146 has built in circuitry to aid suppression of 
voltage transients and RF interference to further reduce 
the chances of false alarms under such conditions. 
 
Operation 
 
 
The green indicator will illuminate to show mains 
power is present 
 
 
The red indicator will flash every 40 seconds to 
show that the detector has performed an automatic 
self test 
 
 
The red indicator will flash rapidly to show an alarm 
condition for the smoke detector 
 
 
The “Test/Hush” button will either silence false 
alarms or perform a unit self test 
 
 
In “Test” mode the alarm will perform a self test and 
sound the horn  
 
 
In “Hush” mode the alarm enters a ten minute period 
of reduced sensitivity to overcome false alarm 
conditions, and will then automatically reset itself 
 
 
When interconnected to other Ei mains powered 
alarms, an alarm on one detector will trigger all other 
interconnected alarms within one second (only the 
triggered alarm will flash a red indicator) 
 
 
The smoke detector will emit a beep and flash the 
red light every 40 seconds to indicate that the 
battery back up is depleted and needs replacing
 
 
 
 
MAINS POWERED 230V~ 
9V Alkaline Battery Back-Up