Sharp 6830 ユーザーズマニュアル

ページ / 5
To remove used dust bag and check filters:
1.  Unplug the hose from the bag compartment lid.
2.  Squeeze bag compartment latch and swing lid up.
3.  Lift exhaust filter out of bag compartment. If dirty, clean 
or replace. The filter can be cleaned by brushing over a 
waste receptacle. Place filter back in bag compartment.
4.  Grasp bag collar and lift used bag out of cleaner and throw 
away.
5.  Pull down on motor filter grille to release the motor filter. 
If  dirty,  clean  or  replace. The  filter  can  be  cleaned  by 
brushing over a waste receptacle. Replace filter in grille, 
rotate grille up and push against cleaner to latch.
 
To install disposable dust bag:
1.  Hold  dust  bag  by  collar  and  push  dust  bag  into  bag 
frame.
2.  Rotate  bag  compartment  lid  down  and  press  against 
cleaner until it latches.
Brush Roll
The brush roll turns to sweep and comb the carpet nap. Keep 
the brush roll free from hair and threads so it will continue 
cleaning. When the bristles of the brush roll no longer touch 
a piece of cardboard held across the bottom plate, the brush 
roll  is  ineffective  because  the  bristles  no  longer  touch  the 
carpet nap. To maintain the most effective cleaning, install a 
new brush roll. 
POWER-TOUCH
®
 Handle
Remote ON/OFF Selector for bare floor or carpet
 
ON – push down on front
 
*Off – push down on back for bare floors.
Vacuum Control
Cleaning suction is reduced by pushing lever to 
LOW position. Place lever at HIGH position to 
increase suction for carpet cleaning.
4
HOW TO USE 
(continued)
ON
      OFF
Dusting  Brush  (stored  inside    cleaner): 
For  furniture,  blinds,  books,  lamp  shades, 
shelves.
Upholstery Nozzle (stored inside  cleaner): 
For curtains, draperies, cushions, fabrics.
Crevice Tool  (stored  inside  cleaner):  For 
crevices,  corners,  baseboards,  between 
cushions.
Cleaning Tools
HOW TO MAINTAIN
The paper bag and filters play a very important role in the 
efficiency of the vacuum cleaner. The purpose of the paper 
bag is to trap dirt and at the same time the paper must be 
porous enough to allow air to pass through. If the paper bag 
or filters become clogged, no air can pass through the cleaner 
and no cleaning takes place regardless of how powerful the 
unit. To keep the cleaner operating at maximum efficiency, 
change  the  dust  bag  frequently  and  clean  the  filters  as 
necessary.
Some fine particles can restrict airflow very quickly and will 
decrease performance even before the bag appears to be 
full. When vacuuming carpet fresheners or cleaners, plaster 
dust,  or  similar  fine  substances,  clean  the  bag  and  filters 
more often.
Bare Floor Brush:  (on some models) For any type 
of hard surface floor.
Turbo  Brush:  (on  some  models)  For  upholstery 
and for stairs.
3.
4.
5.
*Power ON/OFF for canister can only be controlled by canister 
ON/OFF switch.
Filled Bag
Empty Bag
Bag Change Indicator
The bag change indicator bar fills as the airflow through the 
bag decreases. Certain types of fine particles like powder, 
plaster dust, or carpet fibers can restrict airflow very quickly 
and will decrease performance even before the bag appears 
to be full. When the warning appears, change the disposable 
dust bag to restore maximum performance. If a clean dust 
bag does not restore maximum performance, clean the filters 
and check the hose and wands for obstructions.
HOW TO  CHANGE  DISPOSABLE  DUST  BAG 
- Style CN2 and FILTER - Style EF3
NOTE:  Turn off the power switch and disconnect 
electrical  cord  from  wall  socket  before 
changing dust bag. Never use the cleaner 
without a dust bag or filters.