Sharp 6830 ユーザーズマニュアル

ページ / 5
5
THE EUREKA LIMITED WARRANTY
W
hat This Warranty Covers
 
Your Eureka cleaner is warranted to be free from all defects in material and workmanship 
in normal household use for a period of one year. The warranty is granted only to the  
original  purchaser  and  members  of  his  or  her  immediate  household. The  warranty  is 
subject to the following provisions.
W
hat This Warranty Does Not Cover
 
•  Parts of the cleaner that require replacement under normal use, such as disposable dust 
bags, filters, drive belts, light bulbs, brush roll bristles, impellers and cleaning.
 
•  Damages or malfunctions caused by negligence, abuse, or use not in accordance with the 
Owner’s Guide.
 
•  Defects or damages caused by unauthorized service or the use of other than Genuine 
Eureka parts.
W
hat The Eureka Company Will Do
 
The Eureka Company will, at its option, repair or replace a defective cleaner or cleaner part 
that is covered by this warranty. As a matter of warranty policy, the Eureka Company  
will not refund the consumer’s purchase price.
W
arranty Registration
 
Please fill out and return the warranty registration card accompanying your cleaner.
O
btaining Warranty Service
 
To obtain warranty service you must return the defective cleaner or cleaner part along with 
proof of purchase to any Eureka Authorized Warranty Station.
 
You will find the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service 
and Repair.” Be certain that the Warranty Station is “Eureka Authorized.”
 
For the location of the nearest Eureka Authorized Warranty Station or for service information 
visit www.eureka.com, or telephone toll free:  USA: 1-800-282-2886,  Mexico: 5670-6169, 
Canada: 1-800-282-2886.
 
If you prefer, you can write to The Eureka Company, Service Division, 807 North Main 
Street, Bloomington, Illinois 61701, USA.  In Canada write to The Eureka Company, 
866 Langs Drive, Cambridge, Ontario N3H 2N7.
 
If it is necessary to ship the cleaner outside your community to obtain warranty repair, you 
must pay the shipping charges to the Eureka Authorized Warranty Station.
 
Return shipping charges will be paid by the Warranty Station. When returning parts for repair, 
please include the model, type, and serial number from the data plate on the cleaner.
F
urther Limitations and Exclusions
 
Any warranty that may be implied in connection with your purchase or use of the cleaner, 
including any warranty of Merchantability or any warranty for Fitness For A Particular  
Purpose is limited to the duration of this warranty. Some states do not allow limitations 
on how long an implied warranty lasts, so the above limitations may not apply to you.
 
Your relief for the breach of this warranty is limited to the relief expressly provided above. 
In no event shall Eureka be liable for any consequential or incidental damages you  
may incur in connection with your purchase or use of the cleaner. Some states do not 
allow the exclusion or limitation of incidental or consequential damages, so the above  
limitation or exclusion may not apply to you.
 
This warranty gives you specific legal rights. You may also have other rights which vary 
by state.
.
For Genuine Eureka Value, Accept No Imitations!
THE EUREKA COMPANY
Bloomington, Illinois 61701
Brush Roll Belt and Light Bulb
The brush roll belt on the motorized nozzle drives the brush 
roll  to  agitate,  sweep,  and  comb  the  carpet  nap. The  belt 
should  be  checked  regularly  to  be  sure  that  it  is  in  good 
condition. Replace the belt if it is broken, stretching, cracking, 
or slipping. Cut away any hair or thread wound around the 
brush roll or belt pulley because the buildup could cause the 
belt to rotate unevenly.
How to Replace Worn Belt or Light Bulb
 
(On Some Models)
NOTE:  Turn off the switch and unplug the electrical cord 
before replacing belt or bulb. Pulleys can become 
hot during normal use. To prevent injury, avoid 
touching  the  pulleys  when  servicing  the  drive 
belt.
1.  Remove six screws from 
bottom  side.  Turn  unit 
over; pull up on hood to 
remove.
 
Replace  light  bulb, 
i f   n e c e s s a r y.  U s e 
GENUINE  EUREKA 
r e p l a c e m e n t   bu l b , 
59045.
  Continue  to  step  2 
to  change  belt.  Skip 
to  step  7  to  replace 
hood.
2.  Lift  out  brush  roll  and 
discard used belt.
3.  Put  new  belt  around 
brush  roll  pulley  first; 
then the motor pulley.
4.  Place left end cap into the 
base.
5.  Pull  right  end  of  brush 
roll to stretch belt. Secure 
right end cap into base.
6.  Rotate brush roll to seat 
belt.
7.  Position  hood;  secure 
with screws.
Use GENUINE EUREKA replacement belt, 58065A.
Motor Pulley
Brush 
Roll 
Pulley