Electrolux Z2900 Series ユーザーズマニュアル

2.  Remove the two screws from the top of the hood.

3.  Lift hood to remove.

8

The brush roll turns as it sweeps and combs the carpet pile. 
Remove hair and threads from the brush roll so it continues 
brushing the carpet. To maintain the most effi cient cleaning, 
the bristles must touch the carpet. 

The brush roll belt turns the brush roll to agitate, sweep, and 
comb the carpet pile. Check the belt regularly to be sure it is in 
good condition. Replace the belt if it stretches, cracks or loses 
tension. Cut away any hair or threads wound around the brush 
roll or the belt pulley because the buildup could cause the belt 
to rotate unevenly.

1.  Lower handle to fl oor to change belt.

4.  Lift left end of brush roll.
5.  Remove and discard belt.
6.  Place new belt around motor shaft.
7.  Place new belt around brush roll pulley.

8.  Align left end cap with base. Push end cap securely into 

place.

9.  Pull right side of brush roll to stretch belt. Secure right end 

cap into base.

11. Place hood back on cleaner. Replace and tighten two 

screws.

12. Return vacuum to upright position.