Electrolux Z2900 Series ユーザーズマニュアル

1.  Firmly pull the end of the hose from the hose retainer on 

the hood of the vacuum.

2.  Check for blockages in the hose and hose retainer. Flexing 

the hose may help loosen any blockage. If no blockage is 
found, continue to step 4.

If blockage is found, clear the blockage and replace the 
hose in the hose retainer. If the blockage is in the hose 
retainer and cannot be cleared, continue to step 3.

3.  Remove the hood from the cleaner and check for a blockage 

in the brush roll area. Make sure the hose inlet is clear. If 
no blockage is found, continue to step 4.

 

After the blockage is found and cleared, replace the hood 
on the cleaner.

4.  Twist the hose from the coupling elbow on the back of 

cleaner. Check for blockages at cleaner opening and in 
hose. If a blockage is found, clear the blockage.

 

The two screws attaching the clear hose adapter can be 
removed for better access to a blockage.

5.  Screw the hose back onto the back of the cleaner and 

replace the other end of the hose into the hose retainer on 
the hood of vacuum.

9