Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Denon
  4. AVR-4810CI
  5. ユーザーズマニュアル

Denon AVR-4810CI ユーザーズマニュアル

ダウンロード
ページ / 145
Get
ting Star
ted
Connections
Set
tin
g
s
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifications
Pla
ybac
k
Tuning in Radio Stations – HD Radio Technology
If the desired station cannot be tuned in with auto tuning, tune it in 
manually.
When tuning in stations manually, press and hold 
[TU 
d
]
 or 
[TU 
f
]
 to 
change frequencies continuously.
The time (default : 30 sec) for which the GUI menu is displayed can 
be set “GUI” - “Tuner” (vpage 54).
 
Press 
uio
 
p
 to return to 
the original screen.
•
•
•
Selecting Audio Programs
HD  Radio  Technology  enables  stations  to  broadcast  multiple  Audio 
programs and data services on HD2/HD3 channels.
Press 
ui
 to select the audio program.
If the station you are listening to has multiple audio programs, “HD1” 
is indicated on the display. If it only has one audio program, “HD” 
is indicated.
Presetting Radio Stations (Preset Memory)
Your favorite broadcast stations can be preset so that you can tune 
them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset. 
2
Press 
[MEMO]
.
3
Press 
[A ~ G]
 to select the block in which the channel 
is to be preset, then press 
[CHANNEL]
 or 
[1 ~ 8]
 to 
select the preset number.
The memory block can also be selected by pressing 
[SHIFT]
 on 
the sub remote control unit.
b
4
Press 
[MEMO]
 again to complete the setting.
To preset other stations, repeat steps 1 to 4.
Multicasts can also be preset.
Stations  can  be  preset  automatically  at  “Auto  Preset”  (vpage 
63).
•
•
•
NOTE
Preset stations are erased by overwriting them.
Listening to HD Radio Technology
1
Press 
[SOURCE SELECT] 
to display the GUI Source 
Select menu, then select “
” (vpage 31).
2
Set the main remote control unit to the “DTU” mode 
(vpage 108 “Operating the Main Remote Control 
Unit”).
3
Press 
[BAND]
 to select “FM” or “AM”. 
4
Tune in the desired broadcast station.
q
  To tune in automatically (Auto Tuning)
Press 
[MODE]
 to select “HD-AUTO” or “AUTO”, then use 
[TU 
d
]
 
or 
[TU 
f
]
 to select the station you want to hear.
The  “
”  indicator  lights  on  the  display  when  an  HD  Radio 
station is tuned in.
When  “HD-AUTO”  (tuning  mode)  is  selected,  only  HD  Radio 
stations are tuned in.
If “AUTO” (tuning mode) is selected, both HD Radio and analog 
stations are tuned in.
w
  To tune in manually (Manual Tuning)
Press 
[MODE]
 to select “MANUAL”, then use 
[TU 
d
]
 or 
[TU 
f
]
.
•
•
•
5
Adjust the items below.
Adjusting the master volume 
(vpage 85)
Selecting the surround mode 
(vpage 87)
Adjusting the Sound and Picture Quality  
(vpage 90)
n
n
n
Direct Frequency Tuning
You can enter the receiving frequency directly to tune in.
1
Press 
[SEARCH]
.
2
Input frequencies by means of 
[0 ~ 9]
.
If 
o
 is pressed, the immediately preceding input is cancelled.
b
3
When setting is completed, press 
ENTER
.
The preset frequency is tuned in.
Listening to Preset Stations
You  can  also  operate  via  the  main  unit.  In  this  case,  perform  the 
following operations. 
Press 
<TUNING PRESET>
,  then  turn 
<SOURCE SELECT>
  to  select 
the preset radio station.
If  an  audio  program  from  HD2  to  HD8  has  been  interrupted  or  if 
a program is called out using the preset buttons after it has been 
interrupted, HD1 is automatically selected after about 20 seconds.
•
•
Default settings
Tuner presets
A1 ~ A8 87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /100.1 MHz
B1 ~ B8 101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 / 90.1 MHz
C1 ~ C8 530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 / 1710 kHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
n
1
Press 
[A ~ G]
 to select the memory block (A to G).
2
Press 
[CHANNEL]
 or 
[1 ~ 8]
 to select the desired preset 
station.