Panasonic WJ-HD716K ユーザーズマニュアル

52

Install the HDD units by referring the disk slot number.
Detach the front cover in advance. (+ Page 21)
     

Remove the HDD unit brace.

Install the HDD units by referring the disk slot number.

 (1)  Lift the lever on the HDD unit while holding down the 

removal knob, and then insert the HDD unit all the way 
into the HDD slot.

 (2)  Pinch the rim on the HDD slot with the hook on the HDD 

unit securely.

     

 (3)  Press the lever down and push it until the removal knob 

clicks.

 •  Keep the removed HDD unit brace securely. When trans-

porting the recorder, it is necessary to attach it.

 •  Hard disk drives are precise devices. Handle with care

while keeping the following in mind.

 •  Do not subject the hard disk drive to any vibration or

impact.

    Before touching the hard disk drive, eliminate static elec-

tricity by touching a steel locker, etc. When holding the 
hard disk drive, hold the both sides of the hard disk 
drive.

 •  Do not touch the circuit board or the connectors to pre-

vent the hard disk drive from damaging by static electric-
ity.

 •  Contact your dealer for hard disk drives that works on

the recorder. Please be forewarned that operation with 
any hard disk drive other than the specified models is 
not guaranteed under any circumstances.

 •  When using multiple hard disk drives, use the same

model.

    If different models are used together, even when the 

capacities of them are the same, the available capacity 
may be a few percent smaller.

 •  Install the hard disk drives one by one in order starting

from HDD1.(The leftmost slot of the HDD slots is HDD1 
and the rightmost one is HDD4.)

 •  Once the operation has started in the RAID 5 or RAID 6

mode, do not change the positions of the HDD units. If 
they are changed, it may become impossible to read 
recorded data.

 
     

HDD unit brace

Removal 

knob of the 

HDD unit

Lever

(2)

(3)

Removal knob 

of the HDD unit

Lever

Rim

Hook