Denon PMD330 ユーザーズマニュアル

10

Press the 

 button !7 to begin playing a CD.

While the CD is either playing or paused at the desired position,

press the 

A-B

 button @5. The starting point is stored, and 

“A -”

flashes.

While the CD is either playing or paused at the desired position,

press the 

A-B

 button @5. Point B is stored, and 

“A-B”

 lights.

Playback starts from point A, and then the segment between

points A and B plays repeatedly.

Pressing the 

A-B

 button @5 while A-B Repeat playback is in

progress clears points A and B.

Points A and B are cleared not only if the A-B button 

@5

 is

pressed, but also if the   button 

!2

 is pressed (stopping play-

back), or if a scan search or direct search is performed.

The disc playback speed can be adjusted by a maximum of

+/– 12% in 0.1% increments.

When playing two CD players simultaneously, it is possible to

use the pitch bend function on one player to easily adjust the

playback speed so that both CD players are in unison.

Press the 

 button !7 to begin playing a CD.

Press the 

PITCH ON/OFF

 button @6 to turn on the pitch control

function.

Turn 

PITCH/SEARCH

 

DIAL

 @0 clockwise.

-

Turn the dial approximately 10 degrees to increase the playback

speed by 0.1%.

-

PITCH/SEARCH

 

DIAL

 @0 shows up to +12%.

While the 

PITCH BEND +

 @7 button is pressed, the playback

speed increases temporarily by up to 8%.

The disc playback speed changes rapidly when the PITCH

BEND + 

@7

 button is pressed.  As soon as you release the

button, the playback speed immediately returns to the speed

that was in effect before the button was pressed.

If “D.OUT” has been set to “On” in the presets, the pitch bend

function will not work.

Press the 

 button !7 to begin playing a CD.

Press the 

PITCH ON/OFF

 button @6 to turn on the pitch control

function.

Turn 

PITCH/SEARCH

 

DIAL

 @0 to the counterclockwise.

-

Turn the dial approximately 10 degrees to decreases the

playback speed by 0.1%.

-

The 

PITCH/SEARCH

 

DIAL

 @0 shows up to –12%.

While the 

PITCH BEND –

 @8 button is pressed, the playback

speed decreases temporarily by up to 8%.

The disc playback speed changes rapidly when the PITCH

BEND – 

@8

button is pressed.  As soon as you release the

button, the playback speed immediately returns to the speed

that was in effect before the button was pressed.

Press the 

PITCH ON/OFF

 button @6 and the playback speed

returns to normal.