Denon PMD330 ユーザーズマニュアル

12

Press the 

CUE

 button !5 .  The CD player immediately

moves  to the CUE point, and pauses there.

Hold down the 

CUE

 button !5 .

Playback starts from the CUE point.

Playback stops when the 

CUE

 button !5 is released, and

then the CD player returns to the CUE point and pauses.

- Once a cue point has been set, the CD player plays while

holding the CUE button 

!5

. Playback returns to the cue point

when released.

The concept of CUE play is illustrated below.

- When the player is in CUE playback made (CUE button held

down), it is easy to change to normal playback by also pressing

shortly the 

 button 

!7

 . Both the CUE and the 

 button 

!7

can be released now and the player will continue playback.

 (Setting)

Press the 

 button !7 to begin playing a CD.

 

It is possible to use the search, skip scan or direct search func-

tions to find the approximate position from where you wish to

begin playback.

Press the 

 button !7 to pause the disc at the approximate

position from where you wish to mark the CUE point.

Use the 

 button !6 and the 

 button !8 to search for the

exact position from where you wish to mark the CUE point.

Use the 

 button !6 to reverse one frame and then pause.

Use the 

 button !8 to advance one frame and then pause.

If you hold down either the 

 button !6  or the 

 button

!8 , the rate at which the frames reverse or advance changes

while the button is being held down.

It is also possible to use the PITCH/SEARCH dial

 @0 

to find the

exact position.

Press the 

CUE

 button !5 to store the CUE point.

The CUE point is set at this position.

At this point, the 

CUE

 button !5  stops flashing and remains lit.

“CUE Stored” appears on the display.

SEARCH

Press & Hold

PLAY

DISC

PAUSE

Release

CUE

Point

SEARCH

Press & hold

Press

Release

DISC

PLAY

PAUSE

CLEAR

CLEAR