Integra DTR-7.4 ユーザーズマニュアル

21

Using an RCA video connection cable, connect the 
video output jack (composite) of the DVD or LD player 
to the DVD VIDEO IN jack of the DTR-7.4. Or if the 
DVD or LD player has an S video output jack, connect it 
to the DVD S VIDEO IN jack with an S video 
connection cable. Or if the device has component video 
outputs, connect them to one of the banks of 
COMPONENT VIDEO INPUT jacks on the DTR-7.4.
On the initial settings of the DTR-7.4, the DVD input 
source is set for the COMPONENT VIDEO INPUT 1 
jacks.
If you connect the DVD or LD player to the 
COMPONENT VIDEO INPUT 2 jacks, this must be 
changed at Setup Menu 

→ Input Setup → Video Setup 

→ Component Video (See page 38).
Using an RCA audio connection cable, connect the 
audio output jacks of the DVD or LD player to the DVD 
AUDIO IN jacks of the DTR-7.4. Make sure that you 
properly connect the left channel to the L jack and the 
right channel to the R jack.
If the device has a digital output, connect it to either the 
DIGITAL IN COAX jack or DIGITAL IN OPT jack of 
the DTR-7.4, depending on the type of connector on the 
DVD player.
On the initial settings of the DTR-7.4, the DVD input 
source is set for digital input at the COAX 1 jack.
If the digital connection is made at a different jack, this 
must be changed at Setup Menu 

→ Input Setup → 

Digital Setup (See page 36).
Make sure of your DVD player’s digital output settings. 
You need to access the On Screen Menu of your DVD 
player. See the owner’s Manual on your DVD player.
Also, you need to aware of the Table of contents for the 
movie, selecting the movie for Dolby Digital or DTS, 
depends how the movie is encoded.

Using RCA video connection cables, connect the video 
output jack (composite) of the video cassette recorder to the 
VIDEO 1 VIDEO IN jack of the DTR-7.4 and connect the 
video input jack of the video cassette recorder to the 
VIDEO 1 VIDEO OUT jack of the DTR-7.4. Or if the 
video cassette recorder has S video input and output jacks, 
connect them to the VIDEO 1 S VIDEO IN and OUT jacks 
of the DTR-7.4 using S video connection cables. Or if the 
video cassette recorder has component video outputs, 
connect them to one of the banks of COMPONENT 
VIDEO INPUT jacks on the DTR-7.4.

On the initial settings of the DTR-7.4, the VIDEO 1 
input source is set for the COMPONENT VIDEO 
INPUT 2 jacks.
If you connect the video cassette recorder to the 
COMPONENT VIDEO INPUT 1 jacks, this must be 
changed at Setup Menu 

→ Input Setup → Video Setup 

→ Component Video (See page 38).
Using RCA audio connection cables, connect the audio 
output jacks of the video cassette recorder to the VIDEO 
1 AUDIO IN jacks of the DTR-7.4 and connect the audio 
input jacks of the video cassette recorder to the VIDEO 
1 AUDIO OUT jacks of the DTR-7.4. Make sure that 
you properly connect the left channels to the L jacks and 
the right channels to the R jacks.
If you are connecting a digital output device to the 
VIDEO 1 jack instead of a VCR, connect it to either the 
DIGITAL IN COAX jack or DIGITAL IN OPT jack, 
depending on the type of connector on the device.
On the initial settings of the DTR-7.4, the VIDEO 1 
input source is set for digital input at the COAX 2 jack.
If the digital connection is made at a different jack, this 
must be changed at Setup Menu 

→ Input Setup → 

Digital Setup (See page 36).