Integra DTR-7.4 ユーザーズマニュアル

68

Enjoying Music in the Remote Zone—Continued

The section explains how to turn on, select an input 
source, and adjust the volume for Zone 2.

Note:
To control Zone 2 with the remote controller, you must 
first press its Zone 2 button, and then press the next but-
ton within five seconds (i.e., while the DTR-7.4’s 
Standby indicator is flashing).

Notes:
• If the Sleep function has been set, any Zone 2 compo-

nent will turn off along with the DTR-7.4 when the 
specified sleep time expires. To use the Sleep function 
with Zone 2 only, set the Sleep function and then set 
the DTR-7.4 to Standby.

• Only analog input sources are output by the PRE OUT 

SURR BACK/ZONE 2 outputs and the SURR BACK/
ZONE 2 SPEAKERS terminals. Digital input sources 
are not output. If no sound is heard when an input 
source is selected, check if it’s connected to analog 
inputs.

• Since the Zone 2 function and the REC OUT outputs 

use the same circuitry, if the Rec Out button is pressed, 
Zone 2 will be turned off.

• When the SURR BACK/ZONE 2 outputs (SPEAK-

ERS/PRE OUT) are set to Zone 2 (page 67), listening 
modes that need surround back speakers (i.e., Dolby 
Digital EX, DTS-ES, and THX Surround EX) are not 
available.

• While Zone 2 is active, 

 functions will not work.

• While Zone 2 is active, the Pure Audio listening mode 

cannot be selected for the main room.

• You can’t select different radio bands for Zone 2 and 

the main room. For example, if you select FM for the 
main room, then FM will also be selected for Zone 2.

Point the remote controller at the
DTR-7.4 and press the Zone 2 
button followed by the On button.
This activates Zone 2 and, if connected 
to the DTR-7.4’s 12V TRIGGER OUT, 
turns on the Zone 2 amp.
To do this on the DTR-7.4, press 
the Zone 2 button.

To select the Zone 2 input source 
with the remote controller, press 
the Zone 2 button and then roll 
the scroll wheel.
The name of the selected Zone 2 source 
appears on the display.
To do this on the DTR-7.4, press 
the Zone 2 button, and then press 
an input source button within 
eight seconds.
If you select AM or FM, you can use 
the remote controller’s CH/Disc +/–
button to select the presets.
To set the main room and Zone 2 
sources simultaneously, press the Zone 
2 button repeatedly until “Z2 Sel: 
SOURCE” appears on the display.
Now use the scroll wheel or input 
source buttons to select the source.

Master Volume

Tape

Tuner

Phono

Net Audio

CD

Video 1

VCR 1

Video 3

Video 2

VCR 2

Video 4

Video 5

DVD

)

N

)

D

A-FO RM Listening Mode Memory

Video 5 Input

Stereo

Direct / Pure Audio

DSP

Surround

THX

Clear

Rec Out

Zone 2

Of f

Setup

Tuning

Preset

Enter

Return

Dimmer

Display

S Video

Audio

Video

L

R

Memory

FM Mode

DTR-7.4

Digital 

RC-

550M

+

-

+

-

If your Zone 2 receiver/integrated amp 
is connected to the DTR-7.4’s AUDIO 
ZONE 2 OUT L/R outputs, use the vol-
ume control on the receiver/integrated
amp.