Integra DTR-7.4 ユーザーズマニュアル

88

Tape mode is used to control an Onkyo cassette 

recorder connected to the DTR-7.4 via 

. To select 

Note:
While neither the Input button nor Mode button is illu-
minated, the scroll wheel changes the input source and 
remote controller mode simultaneously (e.g., set the 
input source and mode to “TAPE.”)

1

This button is used with the scroll wheel to select 
the remote controller modes. Press the scroll wheel 
until “AMP” appears on the display.

2

The Previous 

 button is used to select the previ-

ous track. During playback it selects the beginning 

of the current track. The Next 

 button is used to 

select the next track. 

The Previous/Next 

 buttons make not work 

properly with some cassette tapes depending on 
how they were recorded.

3

The Rewind 

 button is used to start rewind. The 

FF 

 button is used to start fast forward.

4

●

 

This button is used to start tape recording.

5

This button is used to turn on or off the remote con-
troller’s illuminated buttons.

6

This button is used to select the input source. Press 
this button first, and then roll the scroll wheel until 
“TAPE” appears on the display.

7

This button is used to set the volume of the 
DTR-7.4.

8

This button is used to mute the DTR-7.4. This func-
tion can be set only with the remote controller.

8

This button is used to start tape playback.

0

This button is used to stop tape playback.

A

This button is used to start reverse playback.

RC-

550M

+

-

+

-