Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Integra
  4. DTR-7.4
  5. ユーザーズマニュアル

Integra DTR-7.4 ユーザーズマニュアル

ダウンロード
ページ / 104
98
Using the Remote Controller with Other Components
—Continued
Assigning Remote Controller Modes
With this function you can assign a remote controller 
mode to an input source. This is useful when you con-
nect, say, a CD recorder to the TAPE IN/OUT sockets. 
By assigning the CDR remote controller mode to the 
TAPE input source, you can use the remote controller to
control the CD recorder.
You can reset the remote controller to its default set-
tings.
4
Roll the scroll wheel to select the 
mode you want to delete, and then 
press the scroll wheel.
If the mode is deleted successfully, after 
“OK” has been displayed, the DEL dis-
play (step 3) reappears.
1
Press and hold the Custom button 
for more than three seconds.
The remote controller enters Custom 
mode.
2
Roll the scroll wheel to select 
“MODE,” and then press the scroll 
wheel.
3
Roll the scroll wheel to select 
“ASSGN,” and then press the 
scroll wheel.
4
Roll the scroll wheel to select an 
input source, and then press the 
scroll wheel.
Custom
5
Roll the scroll wheel to select the 
mode you want to assign to the 
specified input source, and then 
press the scroll wheel.
If the assignment is successful, after
“OK” has been displayed, the ASSGN
display (step 3) reappears.
Resetting the Remote Controller
1
Press and hold the Custom button 
for more than three seconds.
The remote controller enters Custom 
mode.
2
Roll the scroll wheel to select 
“MODE,” and then press the scroll 
wheel.
3
Roll the scroll wheel to select 
“RESET,” and then press the scroll 
wheel.
4
Roll the scroll wheel to select 
“YES,” and then press the scroll 
wheel.
The remote controller is reset to its 
default settings.
Custom