ONKYO tx-nr545 ユーザーズマニュアル

Step 2:   Initial Setup

3 

Remote Mode Setup
 Preprograming remote will give you control 
 of other devices from AV receiver remote. 
 Would you like to setup your remote to 
 control your devices? This may take a while
 depending on what and how many you have
 connected. You can always come back to remote
 setup from setup “7-2 Remote Mode”.
 Yes, Continue
 No, Skip

Initial Setup

Exit

SETUP

You can enable operation of the other components using 

the remote controller of the unit. When the Remote Mode 

Setup start screen is displayed, select "Yes, Continue" with 

the cursors and press ENTER on the remote controller. 

Follow the guidance to select the desired REMOTE MODE 

button and in the keyboard screen, enter the first three 

characters of the brand name of the device you are going 

to program and search for the remote control code. The 

guidance will also explain how to set the remote controller.

4 

Network Connection
 Do you want to connect network connection?
 It gives you network services that our AV
 receiver support. If you wish to skip this step.
 select “No. Skip”.

 Yes
 No, Skip

Initial Setup

Exit

SETUP

You can check the network connection and make the Wi-Fi 

setting. When the Network Connection start screen is 

displayed, select "Yes" with the cursors and press ENTER 

on the remote controller. If you select "Wired" in the next 

screen, you can view the LAN cable connection status. To 

make the Wi-Fi setting, select "Wireless", press ENTER on 

the remote controller and follow the sections below.

Wi-Fi connection requires an access point such 

as wireless LAN router (). Write down the SSID 

and password (key) of the access point if they are 

shown in the label of the main body. If the access 

point has an automatic setting button (may be 

called differently according to the manufacturer), 

you can set up without inputting the password. 

For how to use the automatic setting button of the 

access point, refer to its instruction manual.

¼



The unit supports Wi-Fi connection with 2.4 GHz 

access point.

Scan Networks: Use this unit to search for and connect 

to a wireless LAN router or other access point.

Use iOS Device (iOS7 or later): Select this method to 

let this unit share the Wi-Fi settings with your iOS device 

and establish a Wi-Fi connection with ease. (The device 

must be compatible with iOS version 7 or later.)



When the SSID of the access point appears on the TV 

screen, select the desired access point.

 

● If you changed the initial setting of the access point to 

skip password entry, step 3 is unnecessary.

 

● If you changed the initial setting of the access point 

to hide the SSID, see "When the access point is not 

displayed".

The "Enter Password" screen may be displayed 

automatically if the wireless LAN router does not have 

an automatic setting button.

Select the authentication method.

Enter Password
Push Button
PIN code

Wi-Fi Setup

When this screen is displayed, select and set one of the 

three authentication methods: "Enter Password", "Push 

Button" and "PIN code". See below for details of and 

how to set each method.

Enter Password: Enter the password of the access point 

to establish connection.

1 

Select "Enter Password" with the cursor buttons and 

press ENTER.

2 

Enter the password () on the keyboard screen, select 

"OK" with the cursor buttons and press ENTER.

¼



Select "A/a" and press ENTER to toggle between upper and lower 

case. Select "



" or "



" and press ENTER to move the cursor to 

the selected direction. Select   and press ENTER to delete the 

character at the left of the cursor position. To select whether to 

mask the password with "" or display it in plain text, press D on 

the remote control. Press +10 on the remote controller to switch 

between upper and lower case. Press CLR to delete all the input 

characters.

3 

If the security method of the access point to be 

connected is WEP, select "Default Key ID", select "OK" 

and press ENTER.

Push Button: Use the automatic setting button of the 

access point to establish connection.

1 

Select "Push Button" with the cursor buttons and press 

ENTER.

2 

Hold down the automatic setting button of the access 

point for the necessary seconds, select "OK" with the 

cursor buttons and press ENTER.

PIN code: Select this method when the automatic setting 

button of the access point is beyond the reach. Select "PIN 

code" with the cursor buttons and press ENTER to display 

the 8-digit PIN code. Register the displayed PIN code to the 

access point, select "OK" with the cursor buttons and press 

ENTER. For how to register the PIN code to the access 

point, refer to its instruction manual.