Roland KC-60 ユーザーズマニュアル

 

By using a speaker stand, you can mount the KC-60 at the optimal height for use as a monitor speaker or simple PA device.

 

fig. Caution

 

●

 

The KC-60 is designed to be used only with speaker 

stands whose dimensions meet the specifications 

described below.

Do not use it with a speaker stand that does not meet the 

following specifications.

 

fig.05

fig.06_e

 

●

 

When deciding on a stand to use with the KC-60, make 

sure to pick one that is capable of supporting its weight.

 

●

 

Before use, adjust the speaker stand to a height of 165 cm 

(65”) or less and a leg spread of 120 cm (47-1/4”) or more, 

as shown in the figure below.

 

fig.08\

 

●

 

Using a speaker stand that does not meet the 

specifications at left or that is adjusted to a height over 

165 cm (65”), or a leg spread of less than 120 cm (47-1/4”)  

may result in damage to equipment or injury due to the 

stand tipping over.

 

●

 

When using KC-60 with a speaker stand, the speaker 

stand must be carefully placed so it is level and sure to 

remain stable.

 

●

 

Cables connected to KC-60 should be given enough slack 

to prevent accidents that might result from someone 

tripping over them.

 

●

 

To prevent accidents due to falls, do not place any object 

on the KC-60 when it’s mounted on a speaker stand.

 

●

 

Always have at least one other person assist you when 

mounting the KC-60 on a speaker stand, or when 

adjusting the height of the stand while the KC-60 remains 

mounted on it.

Leg spread: 120 cm (47-1/4”) or more

Diameter: 3.8 cm

(1-1/2”)

Diameter: 

136 cm (53-9/16”) 

or more

Leg spread: 120 cm (47-1/4”) or more

165 cm (65”)
or less

120 cm (47-1/4”) or more