Roland KC-60 ユーザーズマニュアル

Making the Connections

Refer to the figure shown below to connect the KC-60 and the other equipment.

fig.03

Here is an example of a setup that makes full use of the KC-

60’s mixer and monitor functions.

A microphone is input to CH 1, which accepts mic level

input. Connect a keyboard, recorder, or other sound-

generating device to the CH 2 and CH 3 inputs.

* To prevent malfunction and/or damage to speakers or other

devices, always turn down the volume, and turn off the power

on all devices before making any connections. Set all of the KC-

60’s channel volume knobs as well as the VOLUME knob to

zero.

* The pin assignment for the XLR type connectors is as shown

below. Before making any connections, make sure that this pin

assignment is compatible with that of all your other devices.

fig.04

* Howling could be produced depending on the location of

microphone relative to speakers. This can be remedied by:

1. Changing the orientation of the microphone.

2. Relocating microphone at a greater distance from the speaker.

3. Lowering volume levels.

* When connection cables with resistors are used, the volume level

of equipment connected to the inputs (CH 1 through CH 3 and

AUX IN) may be low.

If this happens, use connection cables that do not contain

resistors, such as those from the Roland PCS series.

INPUT

OUTPUT

Rear Panel

Control Panel

Mixer

Subwoofer

(With built-in amp)

Stereo
Headphone

Microphone

Drum Machine

CD Player

Keyboard