Madrigal Imaging N380S ユーザーズマニュアル
15
Warning!
Connecting the communication ports other than as
described in this manual can damage the Nº380S and the
associated Mark Levinson components, and will void those
products’ warranties.
described in this manual can damage the Nº380S and the
associated Mark Levinson components, and will void those
products’ warranties.
6
INPUTS 3-6
Accepts right-channel and left-channel (single-ended) inputs from line-level
source equipment such as tuners, CD players, and tape decks.
Accepts right-channel and left-channel (single-ended) inputs from line-level
source equipment such as tuners, CD players, and tape decks.
using a turntable
If a turntable is to be used with the Nº380S, it must be used in conjunction
with a phono preamp such as the Mark Levinson Nº25. The phono preamp
used should provide RIAA equalization and deliver a line-level signal to the
input of the Nº380S (both standard functions of a phono preamplifier)..
with a phono preamp such as the Mark Levinson Nº25. The phono preamp
used should provide RIAA equalization and deliver a line-level signal to the
input of the Nº380S (both standard functions of a phono preamplifier)..
7
EXTERNAL IR INPUT
The Nº380S incorporates an infrared repeater input to facilitate a wide
range of installation options. If desired, the Nº380S may be placed inside a
cabinet or outside the normal line-of-sight in the listening area, with the
controlling IR signal being relayed to the Nº380S by any of a number of
commercially-available IR repeaters.
The Nº380S incorporates an infrared repeater input to facilitate a wide
range of installation options. If desired, the Nº380S may be placed inside a
cabinet or outside the normal line-of-sight in the listening area, with the
controlling IR signal being relayed to the Nº380S by any of a number of
commercially-available IR repeaters.
The specifications for this IR input call for a triggering voltage of 5 volts at
no more than 100 milliamps of current, with the tip of the
no more than 100 milliamps of current, with the tip of the
1
⁄
8
" mini-plug
having positive polarity, as below:
tip polarity for external IR input
+
–
5 volts @ less
than 100 mA
than 100 mA
If you would like more information on the possibility of using an infrared
repeater with your Nº380S, please contact your Mark Levinson dealer.
repeater with your Nº380S, please contact your Mark Levinson dealer.