Classe Audio CP-500 ユーザーズマニュアル

19

Your new preamplifier comes with a versatile remote control which can control 
both the CP-500 itself and several aspects of the rest of a Classé-based system. 
The buttons are arranged in logical groups according to their functions.

Basic Functions
This section along the top of the remote control groups four functions that 
control your basic interactions with the CP-500.

•  Light switches the backlighting of the remote control on, for 

better visibility under low-light conditions. After a few moments 
of inactivity, the backlight switches off automatically.

•  Info takes you directly to the status screen in the LCD menu 

system, displaying several items of information about the 
CP-500 and its current operational status.

•  Display cycles through the three brightness settings of the screen 

display.

•  Standby toggles the CP-500 between standby and operate. 

Input Selection and Volume
The Up and Down arrow keys on the left side of the remote control will 
cycle through the active inputs on your CP-500. 

If you have inputs you are not using, we suggest deactivating them in order 
to provide faster, easier access to the inputs you are actually using. (See the 
section The Menu System for information on how to do this.)

The Up and Down arrow keys on the right side of the remote control 
will raise and lower volume; the square key between them will activate the 
Mute function of the CP-500 (as defined in the menu system; see The 
Menu System for more on your mute options).

The Tape key allows you to easily toggle between listening to the selected 
source and listening to the output of your recording device. If you have a 
recording device (such as a three-head tape deck) which can play back a 
recording while it is being made, you will be able to compare the original 
signal to the recording while you are making it.

�

�

�
�