Classe Audio CP-500 ユーザーズマニュアル

20

Navigation Keys
The central section of the remote control contains the navigation keys. 
This array of buttons is similar to what you may have seen on remote 
controls for DVD players, and is used for navigation of the menu system 
of the CP-500.

•  Home returns you to the normal input selection controls 

normally shown on the LCD screen on the front panel of the 
CP-500. This provides a quick way to get back to normal 
operation, regardless of how deep you might be in the menu 
system.

•  Menu serves two functions: it calls up the menu system when 

you need it in order to adjust something to your preference; 
once within the menu system, pressing Menu returns you to the 
previous level of the menu system. If you press Menu when at 
the top level of the menu system, it will take you back out of the 
menu system to the normal display.

•  The Bal (balance) key takes you directly to the 

balance screen 

in the menu system; once there, you can use the navigation keys 
on the remote to select either the left or right buttons on the 
LCD touchscreen, depending on which way you wish to move 
the balance. Adjust the relative left-right balance of the system 
by using the Enter key on the remote to “press” the appropriate 
button on the display.

•  Up/Down/Left/Right keys allow you to move within a 

particular menu screen, changing the highlighted item up/down/
left/right as you like, from the comfort of your listening position.

•  The Enter key allows you to select the highlighted item, having 

the same effect as if you had pressed the button on the LCD 
touchscreen. 

Fkey Controls
The CP-500 remote control can also control user-defined functions as 
well. The F1/F2/F3/F4 keys are available for controlling aspects of the CP-
500 not covered by the other buttons on the remote control. 

You are able to choose what the CP-500 should do in response to receiving 
the infrared signal that a particular Fkey has been pressed. The list of 
possible functions is quite extensive, and is found in the menu system (see 
the next section in this manual, entitled The Menu System).