Classe Audio CP-700 ユーザーズマニュアル
33
CAN-Bus Classé’s Controller Area Network, or CAN-Bus, opens the way to a new level
of interaction between our Delta range of amplifi ers, preamps, processors
and source components. When the CP-700 is connected with CAN-Bus, the
diff erent elements of a Delta series system are in constant communication,
creating a “global” network that delivers system wide status information and
shared operational features, all through the touchscreen display.
and source components. When the CP-700 is connected with CAN-Bus, the
diff erent elements of a Delta series system are in constant communication,
creating a “global” network that delivers system wide status information and
shared operational features, all through the touchscreen display.
features CAN-Bus will allow a single Delta series touchscreen to:
• Display status information for every connected unit, including
amplifi ers which do not have a touchscreen display.
• Create a “PlayLink” that allows an SSP or Preamp to automatically
switch to the correct input when a Delta series source component
starts playback.
starts playback.
• Adjust the global system brightness.
• Confi gure the entire system to go in and out of standby at the
• Confi gure the entire system to go in and out of standby at the
touch of a button and also bring individual components in and
out of standby.
out of standby.
• Mute any connected unit.
hardware setup 1
Classé Delta Series Products
Two or more Classé Delta series products are required, at least one of which
must have a touchscreen display.
Two or more Classé Delta series products are required, at least one of which
must have a touchscreen display.
2
Category 5 Network Cables
Th
Th
ese are ordinary network cables, commonly used for broadband Internet
connections. Th
ey should be typical “straight through” cables not the “crossed
over” type, and the total required will be one less than the total number of
Delta series components in your system.
Delta series components in your system.
3 CAN-Bus
Terminator
A single CAN-Bus Terminator may be required. It is inserted into the
CAN-Bus OUT connector of the last component in the CAN-Bus
daisy chain. One is included in the box with your CP-700. They are also
available free of charge from your nearest Classé Customer Support Centre
http://www.Classeaudio.com/support/service.htm
CAN-Bus OUT connector of the last component in the CAN-Bus
daisy chain. One is included in the box with your CP-700. They are also
available free of charge from your nearest Classé Customer Support Centre
http://www.Classeaudio.com/support/service.htm
4
SSP-300 & 600 CAN-Bus Interface Box
Systems that include an SSP-600 or SSP-300 will also require an
SSP-300/600 CAN-Bus Interface Box. Th
Systems that include an SSP-600 or SSP-300 will also require an
SSP-300/600 CAN-Bus Interface Box. Th
ese are included with the products or
available free of charge from your nearest Classé Customer Support Centre
http://www.Classeaudio.com/support/service.htm
http://www.Classeaudio.com/support/service.htm