Classe Audio CP-700 ユーザーズマニュアル

20

•  The Bal (balance) key takes you directly to the balance screen 

in the menu system; once there, you can use the navigation keys 
on the remote to select either the 

left or right buttons on the 

LCD touchscreen, depending on which way you wish to move 
the balance. Adjust the relative left-right balance of the system 
by using the Enter key on the remote to “press” the appropriate 
button on the display.

•  Up/Down/Left/Right keys allow you to move within a 

particular menu screen, changing the highlighted item up/down/
left/right as you like, from the comfort of your listening position.

•  The Enter key allows you to select the highlighted item, having 

the same effect as if you had pressed the button on the LCD 
touchscreen. 

•  The Tape key is not a navigation key, per se, but allows you to 

easily toggle between listening to the selected source and listening 
to the output of your recording device. If you have a recording 
device (such as a three-head tape deck) which can play back a 
recording while it is being made, you will be able to compare the 
original signal to the recording while you are making it.

Fkey Controls
The CP-700 remote control can also control user-defined functions as 
well. The 

F1/F2/F3/F4 keys are available for controlling aspects of the CP-

700 not covered by the other buttons on the remote control. 

You are able to choose what the CP-700 should do in response to receiving 
the infrared signal that a particular Fkey has been pressed. The list of 
possible functions is quite extensive, and is found in the menu system (see 
the next section in this manual, entitled The Menu System).