Meyer Sound Mina Compact ユーザーズマニュアル

34

The MYA-MINA mounting yoke flies up to three MINA loud-
speakers from a single hanging point using a C-clamp or 
equivalent. The yoke includes two bracketing options: the 
MPA-2 for attaching to two cabinets, and the MPA-3 for 
attaching to one or three cabinets. The brackets bolt directly 
to the M6 threads in the end frames for one of the cabinets. 
For flown applications, the yoke supports up to 30 degrees 
of uptilt and severe downtilts of up to 90 degrees. For flying 
larger arrays, the MG-MINA grid is recommended; for 
smaller profile applications, the MUB-MINA U-bracket is 
recommended.

For complete information on configura-

tion and load ratings for the MYA-MINA, as 

well as for other rigging accessories, refer to the 
MG-MINA Assembly Guide (PN 05.207.101.01) avail-
able at 

.

The MYA-MINA’s mounting bracket 

at the top of yoke has one 1/2-inch center hole 

that is rated for flown applications. The smaller two 
center holes and four corner holes should only be 
used for attaching to pole-mount adapters.